Packard Performance Pro 5 Flow Forged UTV Wheel (Beadlock)
The Packard Performance Pro 5 Flow Forged UTV Wheel (Beadlock) delivers a striking aesthetic paired with extreme off-road strength. Featuring a clean five-spoke design often found on premium show cars, this wheel offers a high-end look engineered to support high-horsepower side-by-side machines. With every size, look, and ring available for the Pro 5 in one place, drivers can select the exact bolt pattern and build the precise setup required. This wheel provides elite styling built specifically for deep sand and rugged trail conditions.
Constructed utilizing a modular two-piece design, each wheel pairs a solid 6061 billet aluminum center in a clear-coated machined silver finish with a premium flow-forged barrel available in gloss black or polished finishes. The flow-forged manufacturing process spins the barrel under intense pressure, stretching the aluminum so the metal stays dense and the grain runs continuously along the rim. This creates a tough, lightweight barrel that tends to bend under hard impacts rather than cracking, keeping the wheel functional in harsh environments.
Built with a robust 20-bolt center-to-barrel architecture specifically tailored for 5x114.3 platforms, the true functional beadlock configuration clamps the tire bead securely between the flow-forged barrel and the outer ring. This positive clamping action allows drivers to air down to low tire pressures for maximum traction and flotation in deep sand without risking tire spin or bead unseating under high engine torque.
**The listed price is per individual wheel. Images may not reflect exact combination chosen.**
Features
- Pro 5 Billet Center: Features a clean five-spoke design for a premium show-car aesthetic, machined from solid 6061 billet in a clear-coated machined silver finish.
- Flow-Forged Barrel Options: Available in Gloss Black (piano black with a machined mill step and lip) or Polished (a soft mirror on the lip and inside faces) to match the vehicle's build configuration.
- Beadlock Ring Versatility: Available in Black Contrast Cut, Polished, Gloss Black, or Polished Gloss Black finishes across V.1, V.2, and V.3 ring designs.
- 20-Bolt Center-to-Barrel Architecture: Built using a robust 20-bolt pattern securing the center to the barrel; replacement barrels for this wheel must be the 20-bolt version.
- Custom Center Caps: Includes a standard billet cap machined to match the center face, with an optional silver spinner cap upgrade that floats on a bearing and stays put while the wheel turns.
- Made in Clearfield, Utah: Machined, assembled, and finished entirely in-house under one roof.
- Functional Beadlock Security: Firmly clamps the tire bead to eliminate tire slippage and bead unseating during low-PSI dune operation.
Flow-Forged Barrel Technology
Unlike standard cast wheels poured into molds, Packard Performance flow-forged barrels spin on a mandrel while precision rollers press the aluminum thinner and stretch it to width. This process maintains dense metal integrity and aligns the grain structure with the rim, delivering extreme strength and impact resistance that bends rather than shatters under severe shock loads.
Modular Design and Ring Compatibility
Built with modularity in mind, the two-piece center and barrel setup means you can replace individual components like barrels, centers, or caps if trail damage occurs. Every Packard beadlock wheel uses a standardized outer ring mounting pattern, making it simple to swap between V.1, V.2, or V.3 ring designs in Black Contrast Cut, Polished, Gloss Black, and Satin Black finish to customize your look.
Specifications
- Center: Pro 5 · Machined Silver (Solid 6061 billet, machined and clear-coated)
- Barrel Options: Flow Forged · Gloss Black (Piano black with a machined mill step and lip) OR Flow Forged · Polished (A soft mirror on the lip and inside faces)
- Build Configurations: Black Contrast Cut (Gloss black barrel) or Polished Silver (Polished barrel)
- Beadlock Ring: Black Contrast Cut, Polished, Gloss Black, or Polished Gloss Black finishes | V.1, V.2, or V.3 Beadlock Ring Designs
- Size: 15x7 Front or 15x11 Rear
- Bolt Pattern: 5x114.3
- Center-to-Barrel Bolts: 20-bolt (A replacement barrel for this wheel must be the 20-bolt version)
- Center Cap: Billet Cap (Machined to match the center) OR Silver Spinner Cap (Floats on a bearing and stays put while the wheel turns)
- Made In: Clearfield, Utah (Machined, assembled and finished in-house)
Why It Stands Out
The Packard Performance Pro 5 Flow Forged UTV Wheel (Beadlock) stands out by uniting the premium five-spoke billet center with a high-strength flow-forged barrel and highly customizable beadlock rings. Handcrafted in Utah, it combines low-PSI beadlock performance with massive modular replacement convenience and dynamic custom build configurations.
Popular UTVs these wheels fit:
- Polaris RZR Pro R
- Polaris RZR Turbo R
- Polaris RZR Pro S
- Polaris Xpedition
- Polaris Ranger XD 1500
- CFMOTO ZFORCE Z10
- CFMOTO UFORCE U10 Pro
- Segway Super Villain SX20
Wheel Offset
7"
- Positive = 3 1/2"
- Negative = 3 1/2"
11"
- Positive = 5 1/2"
- Negative = 5 1/2"
Notes
- Check valve stem tightness before mounting a tire on the rim.
- Retighten all-wheel center bolts periodically to ensure proper torque (22-foot lbs.)
- Red grade Loctite on wheels center bolts is required
- Retighten all wheel lug nuts periodically to ensure proper tightness
- Wheel weight may vary slightly due to different bolt patterns
- Warranty is void if wheel centers are removed from wheel drum
