SuperATV - Can-Am Defender HD7-HD10 / MAX HD7-HD10 Ready-Fit Winch

Get Out of Any Sticky Situation with a Defender HD7 Ready-Fit Winch

Mud holes and tricky terrain are all part of the ride—and so is getting stuck now and then. SuperATV's HD7 Ready-Fit Winch comes pre-mounted and pre-wired, so you can skip the hassle and get straight to riding. Just pick your Black Ops 4500 or 6000 lb. winch and count on an easy pull when things get messy.

Installation Doesn't Take Long at All

This HD7 winch makes installation a breeze. It's already wired and mounted to a custom-fit bracket, so you're most of the way there. Just bolt it up, plug in the harness, and connect power under the hood. Easy install—and you've earned a break.

Black Ops Winch

Pick a 4500 or 6000 lb. Black Ops Winch and you'll be ready for whatever the trail throws at you. Mud, rain, and deep ruts are no problem thanks to the water-resistant housing. A wireless remote and 50-ft synthetic rope make recovery simple, giving you easy control when you need it most.

You Get Everything You Need

This HD7 quick-mount winch is ready to go right out of the box, with everything you need to get moving fast. It includes a pull strap, Clevis hook, and stopper for dependable recovery. You also get both wired and wireless remotes, so you're covered no matter the situation.

Synthetic Winch Rope

Steel cable can be heavy, rough on your hands, and prone to rust—but synthetic rope is a whole different story. It's lightweight, easy to handle, and built to resist the elements. Plus, it's strong enough to pull you out of just about any rut with confidence.

Kit Includes:

• Fully assembled and mounted 6000 lb. or 4500 lb. Black Ops Winch
• 50' synthetic rope
• Wireless remote with water-resistant receiver
• Wired dash rocker switch
• Heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters)
• Aluminum hawse fairlead—6.0" (152.4 mm)
• Winch hook kit
• Hook pull strap
• Rope stopper
• All hardware and access to instructions

Specifications:

• Mount made with heavy-duty 3/16" steel
• Preassembled and wired
• Waterproof seals and solenoid
• Remote range: 50'
• 266:1 gear ratio (6000 lb.), 166:1 gear ratio (4500 lb.)
• Permanent magnet DC 12V, 1.9 HP motor (6000 lb.), 1.3 HP motor (4500 lb.)
• Plug-and-play installation