SuperATV - Can-Am Defender HD7-HD10 / MAX HD7-HD10 Ready-Fit Winch

The Easiest Way to Install Your Defender HD10 Winch

Deep mud, rough trails, and tough recoveries come with the territory. SuperATV's Can-Am Defender HD10 Ready-Fit Winch makes it simple with a pre-mounted, pre-wired setup right out of the box. Add a 4500 or 6000 lb. Black Ops Winch and be ready to pull yourself free whenever you need it.

Installation is Quick and Easy

The HD10 quick-install winch keeps things simple from the start. It comes pre-mounted and pre-wired on a custom bracket, so you're just finishing the job. Install the hardware, plug in the harness, and connect power under the hood—then you're good to go.

Black Ops Winch

Choose a 4500 or 6000 lb. Black Ops Winch and you're set for tough recoveries. It's protected in a water-resistant case to handle messy conditions without issue. With a wireless remote and 50-foot synthetic rope, you get simple, reliable control every time you winch.

Comes with Everything You Need

This HD10 quick-mount winch is a complete kit designed to get you back on the trail fast. It comes with a pull strap, Clevis hook, and stopper for reliable recovery. You'll also have wired and wireless remotes, giving you flexible control when it matters most.

Synthetic Winch Rope

Steel cable has its drawbacks, but synthetic rope keeps things simple. It's lighter, safer to handle, and resistant to the elements, making recovery easier all around. And with serious pulling strength, it's ready to help you out of even the toughest situations.

Kit Includes:

• Fully assembled and mounted 6000 lb. or 4500 lb. Black Ops Winch
• 50' synthetic rope
• Wireless remote with water-resistant receiver
• Wired dash rocker switch
• Heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters)
• Aluminum hawse fairlead—6.0" (152.4 mm)
• Winch hook kit
• Hook pull strap
• Rope stopper
• All hardware and access to instructions

Features:

• Mount made with heavy-duty 3/16" steel
• Preassembled and wired
• Waterproof seals and solenoid
• Remote range: 50'
• 266:1 gear ratio (6000 lb.), 166:1 gear ratio (4500 lb.)
• Permanent magnet DC 12V, 1.9 HP motor (6000 lb.), 1.3 HP motor (4500 lb.)
• Plug-and-play installation