SuperATV - Can-Am Defender / Defender MAX Ready-Fit Winch

Get Your Defender HD9 Winch Installed Fast

Getting buried in the mud is part of the adventure—getting out should be easy. With SuperATV's Can-Am Defender HD9 Ready-Fit Winch, you're set up with a pre-mounted, pre-wired system that saves time and effort. Pair it with a 4500 or 6000 lb. Black Ops Winch and keep moving no matter what.

Installation is a Breeze

With the HD9 quick-install winch, the hard work is already handled. It arrives pre-mounted and pre-wired, so installation is straightforward. Bolt it in, connect the harness, and tie into power under the hood. That's it—you're trail-ready faster.

Black Ops Winch

A 4500 or 6000 lb. Black Ops Winch gives you the strength to get unstuck with confidence. Designed with a water-resistant housing, it's ready for mud, water, and rough weather. The wireless remote and 50-ft synthetic rope make recovery smooth and straightforward.

Includes Everything You Need

The HD9 quick-mount winch includes everything you need to install and get to work quickly. A pull strap, Clevis hook, and stopper come standard for solid recovery support. With both wired and wireless remotes, you've got control your way in any situation.

Synthetic Winch Rope

Forget the downsides of steel cable—heavy weight, sharp edges, and corrosion. Synthetic rope is lightweight, easy to use by hand, and built to stand up to mud and weather. And when it counts, it's strong enough to get you unstuck from deep ruts.

Kit Includes:

• Fully assembled and mounted 6000 lb. or 4500 lb. Black Ops Winch
• 50' synthetic rope
• Wireless remote with water-resistant receiver
• Wired dash rocker switch
• Heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters)
• Aluminum hawse fairlead—6.0" (152.4 mm)
• Winch hook kit
• Hook pull strap
• Rope stopper
• All hardware and access to instructions

Features:

• Mount made with heavy-duty 3/16" steel
• Preassembled and wired
• Waterproof seals and solenoid
• Remote range: 50'
• 266:1 gear ratio (6000 lb.), 166:1 gear ratio (4500 lb.)
• Permanent magnet DC 12V, 1.9 HP motor (6000 lb.), 1.3 HP motor (4500 lb.)
• Plug-and-play installation