Super ATV 2024+ Polaris RZR XP 2" Forward Offset A-Arms
Fitment:
- Polaris RZR XP : 2024+
- Polaris RZR XP 4 : 2024+
NOTE:
- Mud scraper MUST be removed if running Keller Ball Joints in upper A-Arms
- Max tire size on 2024–2025 models is 34” with Super ATV Bumper installed
- Bump stop (included) or SATV tie rods required
- 2026+ A-Arms are NOT compatible with Assault Industries Sway Bar Link (SBL-P-RZRTS-BR)
Take on tough trails and rocky obstacles with Super ATV’s 2” Forward Offset A-Arms for the Polaris RZR XP.
Designed to improve stability and increase tire clearance, these heavy-duty A-arms provide 1.5” of additional ground clearance and room for up to 36” tires without a lift, depending on your setup. Built with oversized 1.25” diameter tubing, a UV-resistant powder coating, and preinstalled UHMW bushings, they’re designed to handle rough terrain while resisting rust and corrosion.
The fully adjustable pivot blocks come pre-set to OEM specifications, making installation easier while allowing you to fine-tune your camber when adding accessories or a lift. This helps maintain ride quality and reduce tire wear.
Plus, when you purchase Super ATV ball joints with your A-Arms, Super ATV will install them for free, saving you time in the garage so you can spend more time on the trails!
NOTE: You MUST re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.
- Super Duty 300M Ball Joints: Made from 300M-grade steel, these ball joints are 2.25 times stronger than stock. Feature an adjustable steel-on-steel design and easy-access grease zerks for simple maintenance.
- Keller Ball Joints: Feature a two-piece, threaded design that eliminates the need for snap rings and prevents pullout. Built with chromoly steel studs and tool-steel bodies. Greaseable and rebuildable for long-lasting performance.
- Heavy-Duty Ball Joints: Constructed from hardened 4340 VAR steel with zinc plating for superior strength. Adjustable and greaseable, they can withstand twice the pressure of OEM ball joints.
- Standard-Duty Ball Joints: Affordable OEM-quality replacements made with hardened chromoly steel studs and housings. Zinc plated for added durability and designed to match or exceed stock strength.
2024–2025 Kit Includes:
- Upper and lower 2” forward offset A-arms
- Preinstalled UHMW bushings
- Steering stop Kit
- Brake line clips and hardware
- Grease fittings
2026 Kit Includes:
- Upper and lower 2” forward offset A-arms
- Preinstalled UHMW bushings
- Steering stop Kit
- Bump stop kit
- Brake line clips and hardware
- Grease fittings
Features:
- Adds 2” of forward offset
- Fit up to 36” tires
- 1.25” tubing is larger than stock
- Adjustable lower pivot block for full camber adjustability
- Includes high-quality preinstalled UHMW bushings at no extra cost
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
- 2024-2025 MAX TIRE SIZE: 36"
- 2026 MAX TIRE SIZE: 35” w/ bump stop (included) OR SATV Tie Rod Kit; 36” w/ bump stop (included) AND SATV Tie Rod Kit
