Super ATV 2016+ Can-am Defender HD8 Atlas Pro BFT Suspension Kit
Fitment:
- Can-Am Defender HD 8 : 2016+
- Can-Am Defender HD 8 DPS : 2016+
- Can-Am Defender HD 8 XT : 2016+
- Can-Am Defender HD 8 XTP : 2018+
- Can-Am Defender MAX HD 8 : 2017+
- Can-Am Defender MAX HD 8 DPS : 2017+
- Can-Am Defender MAX HD 8 XT : 2017+
Run 34” tires on your Can-Am Defender HD8 without a lift kit using Super ATV’s Atlas Pro BFT Suspension Kit.
It gives you the extra clearance you need with 2” forward-offset Atlas Pro A-arms, shock brackets, and spring spacers, while keeping the Defender’s ride and handling comfortable. The heavy-duty A-arms are made from oversized 1.5” DOM tubing, reinforced with CNC-cut steel brackets, and provide up to 1.5” of additional ground clearance.
Want to save even more time? Add Super ATV ball joints and they’ll install them for free, so you don’t have to press in the ball joints yourself or deal with the hassle in your garage.
NOTE: You MUST re-use your stock ball joints if you don’t select preassembly.
-
Keller Ball Joints: Two-piece, snap-ring-free design that threads into the A-arm for a secure fit. Greaseable and rebuildable, with chromoly steel studs and tool-steel bodies.
-
Super Duty 300M Ball Joints: Built with ultra-strong 300M steel and an adjustable stud. Designed to be 2.25× stronger than stock for bigger tires and heavy use.
-
Heavy-Duty Ball Joints: Made from hardened 4340 VAR steel with zinc plating and tested to handle 2× the pressure of OEM ball joints.
-
Standard Duty Ball Joints: An affordable OEM-quality replacement made with hardened chromoly steel studs and housings for strength and long-lasting performance.
Kit Includes:
- Upper and lower front A-Arms
- Steering stop kit
- 17” Limit straps (Not needed if running Rhino 2.0 Axles)
- Spring spacers
- Shock brackets
- Shock bump stop (Required only for 34” tires)
Features:
- Fit 34” tires with minimal lift
- 2” forward offset A-Arms
- Made with 1.5” x .138” wall steel DOM tubing
- 0.5” larger than stock
- 0.25” larger than our standard High-Clearance 2” Offset A-Arms
- 2” of lift
- High-clearance - 1.5” of additional clearance
- Full camber adjustability
- Pivot blocks pre-adjusted to factory length
- Reinforced shock mounts
- Includes all 4 front A-Arms
- Does not come with bushings - can be used with OEM or Super ATV bushings
- Can be used with OEM or aftermarket ball joints
- UV-Resistant powder coat finish
- Backed by a lifetime warranty!
