Super ATV 2016-2019 Can-am Defender HD10 Atlas Pro BFT Suspension Kit
Fitment:
- Can-Am Defender HD 10 : 2016-2019
- Can-Am Defender HD 10 DPS : 2016-2019
- Can-Am Defender HD 10 XT : 2016-2019
- Can-Am Defender HD 10 XT Cab : 2016-2017
- Can-Am Defender HD 10 XTP : 2018-2019
- Can-Am Defender HD 10 Mossy Oak : 2018-2019
- Can-Am Defender MAX HD 10 : 2017-2019
- Can-Am Defender MAX HD 10 DPS : 2017-2019
- Can-Am Defender MAX HD 10 XT : 2017-2019
- Can-Am Defender MAX HD 10 XT Cab : 2017 Only
The Super ATV Atlas Pro BFT Suspension Kit for the Can-am Defender HD10 gives you the clearance needed to run 34" tires without a bulky lift.
The kit combines forward-offset Atlas Pro A-Arms with 2" shock brackets and spring spacers, giving you more clearance while keeping the machine stable on rough trails.
The Atlas Pro A-arms are built from heavy-duty 1.5" DOM steel tubing and feature a high-clearance design that adds 1.5" of ground clearance. Reinforced mounts, CNC laser-cut brackets, billet aluminum spacers, and a UV-resistant powder coat provide added strength and durability.
The A-Arms are also backed by a lifetime warranty. For easier installation, Super ATV will install your ball joints for free when you add them to your order.
NOTE: You MUST re-use your stock ball joints if you don’t select preassembly.
-
Keller Ball Joints: Two-piece design threads onto the A-arms like a nut and bolt, helping prevent pullout. Made with a chromoly steel stud and tool-steel body. Greaseable and rebuildable.
-
Super Duty 300M Ball Joints: Built with 300M-grade steel and an adjustable stud for maximum strength. Rated at 2.25× stronger than stock.
-
Heavy-Duty Ball Joints: Made with hardened 4340 VAR steel and zinc plating for added strength and durability. Tested to handle 2× the pressure of an OEM ball joint.
-
Standard Duty Ball Joints: A cost-effective OEM-quality replacement made with hardened chromoly steel studs and housings with zinc plating for strength and long-term durability.
Kit Includes:
- Upper and Lower front A-Arms
- Steering stop kit
- 17” Limit straps (NOT needed if running Rhino 2.0 Axles)
- Spring spacers
- Shock brackets
- Shock bump stop (Required ONLY for 34” tires)
Features:
- Fit 34” tires with minimal lift
- 2” forward offset A-Arms
- Made with 1.5” x .138” wall steel DOM tubing
- 0.5” larger than stock
- 0.25” larger than our standard High Clearance 2” Offset A-Arms
- 2” of lift
- High-clearance - 1.5” of additional clearance
- Full camber adjustability
- Pivot blocks pre-adjusted to factory length
- Reinforced shock mounts
- Includes all 4 front A-Arms
- Does not come with bushings - can be used with OEM or Super ATV bushings
- Can be used with OEM or aftermarket ball joints
- UV-Resistant powder coat finish
- Backed by a lifetime warranty!
