Spring Brake Thingy Kawasaki KRX 1000 Parking Brake
Fitment:
- All Kawasaki KRX 1000
The Parking Brake fits all Kawasaki KRX 1000 models and features pre-machined holes that allow you to add a padlock, giving you an extra theft-deterrent option.
Installation is simple and quick - remove the 12mm nut behind the brake pedal and the plastic rivet on the left side of the pedal. Install the parking brake onto the factory stud, reinstall and tighten the 12mm nut, then use the supplied 1/4" bolt and nut to secure the brake where the plastic rivet was.
To engage, press the brake pedal with your right foot and use your left foot to slide the red arm to the right, locking the pedal down. To release, simply press the brake pedal again.
NOTE:
- ALWAYS USE PARK WITH THE SPRING BRAKE THINGY AND MAKE SURE YOUR BRAKES ARE IN GOOD WORKING CONDITION.
