Note: Both kits require the EVP Silicone Charge Tube Kit and EVP Intake Tube Kit for proper installation and functionality.
Don't let boost leaks rob your ride of power! The EVP Billet Boost Recirculating Valve (BRV) for the CFMOTO Z10 delivers unstoppable, leak-free performance. Choose between running your factory Z10 BRV with the Factory BRV Adaptor Kit or fully transform your Z10 with the EVP BRV Kit.
The EVP BRV Kit is engineered to operate consistently without leaks and maintain extremely high manufacturing tolerances. Includes a body, cap, and piston, precision CNC-machined from billet aluminum with tolerances approaching 0.0003 inches. Sliding components are hard anodized and coated to ensure durability throughout the engine's lifespan. The EVP BRV incorporates three sealing o-rings to provide leak-proof operation, unlike the factory design. For each vehicle/engine type, the spring rates are properly matched for optimum performance.
EVP BRV Kit Features:
- Prevents turbo compressor surge, which causes lost performance and decreased throttle response
- Redirects excess air back into the intake system when the throttle plate is closed
- Plug-and-play resistor included that connects directly to the factory BRV harness, preventing a check engine light
- Protects the longevity of the turbocharger
- Body, piston, and cap machined from billet aluminum and tested to 500+ horsepower
- Cap is anodized and re-machined for easy gripping for spring tension adjustments
- Piston and body are hard coated with impregnated Teflon anti-friction matrix
- Three sealing O-rings for leak-proof operation
- Does not produce the "pshh" sound that some customers look to avoid
- Proudly machined and made in the USA
- Available in Black or Orange
- Includes a billet "T" barb allowing EVAP cars to run without any engine lights or canister faults
Factory BRV Adaptor Kit Features:
- Reuses Factory Electronic BRV (not included)
- Electronically controlled valve from the ECU
- Includes billet adaptor that fastens to factory BRV
- Available in Black or Orange
Boost Recirculating Valve vs. Blow-Off Valve
A blow-off valve (BOV) and boost recirculating valve (BRV) are mechanically similar and perform similar jobs in different ways. Both valve bodies attach to the charge tube and are designed to release turbocharger pressurized air once the throttle body closes to prevent turbocharger compressor stalling. Both valves connect to a manifold vacuum/pressure port so when the throttle body closes, the manifold vacuum pulls the BRV/BOV piston open. When the throttle blade opens and the manifold sees positive pressure, the piston closes.
When the BRV valve is open, built-up pressure in the charge air system gets diverted back to the fresh air side of the turbocharger, helping to keep the turbocharger spooled up when the throttle is modulated from part throttle to wide open throttle and back. This makes boost response crisper during throttle modulation. A BOV operates the same way but vents most pressurized air to the atmosphere, producing the notorious "pssshh" sound.
Fitment: 2026 CFMOTO Z10
Requires EVP Silicone Charge Tube Kit and EVP Intake Tube Kit
Disclaimer: This intake product may be intended for off-road or competition use only unless otherwise stated. Installation may affect emissions compliance and vehicle legality in certain jurisdictions. Buyer is responsible for confirming legal use and proper application before purchase or installation.
Fits The Following Vehicles
- 2026 ZFORCE Z10