EVO 2021+ Can-Am Maverick X3 Turbo RR MG1 Adjustable 2-Step Launch Control Late-Model
EVP takes launch control to the next level with its MG1 Adjustable Launch Control for late-model 2021+ Can-Am X3 Turbo RR models.
Once installed, you can adjust the launch RPM on the fly using the factory controls - no CodeShooter app or ECU re-flash required. Using the OEM headlight momentary switch and gas pedal, launch RPM can be adjusted in 100 RPM increments from 2,200 to 5,200 RPM. Proper clutching is required.
The system also adds real-time boost, peak boost, and AFR monitoring directly to the factory dash without requiring a dash flash. The updated staging mode lets you activate launch control before entering the beams, giving you approximately 2.5 minutes to position and stage before it automatically times out.
This gives you the flexibility to easily switch between racing, dunes, and trail riding without the hassle of additional tuning or equipment.
Compatible only with late-model 2021+ Maverick X3 Turbo RR models that have been hardware unlocked and flashed by EVP.
EVP DISCLAIMERS:
- NOT available for early model 2021 Maverick X3 Turbo RR's at this time (early 2021 = manufactured in/before October 2020).
- ONLY compatible with late-model 2021+ Maverick Turbo RR's that have been unlocked and tuned by EVP.
- Clutching Required: EVP Engagement Red Primary Spring increases RPM engagement to 2200RPM. Higher launch RPM levels require an EVP PDrive Clicker Clutch Kit (or aftermarket clutch kit)
***ECU SEND-IN NOTE: Select your MG1 Adjustable Launch Control flash delivery method below. If selecting 'Bench Flash (ECU Send-In)" please FILL OUT AND PRINT the EVP ECU Submission Form. Call to get Submission Form emailed.
