Aftermarket Assassins Slider Boss Secondary Clutch Roller Conversion Kit
A MUST-HAVE ITEM. These high quality rollers replace the square factory sliders found in all of the 2016-Up RZR clutches (Not RS1 or RZR Turbo). These actual rollers will improve shifting and will show less clutch wear. This is a great improvement and we'd recommend doing them as soon as possible to prevent your square rollers wearing too far into your clutch. These are also a higher quality replacement for the inner rollers. Requires removing helix so we recommend upgrading these if you're installing a Stage 2 clutch kit. Just order two sets for a complete rebuild.
Features:
- Better wear resistance
- Smoother clutch shift
- Faster clutch shift
- A must-have addition when purchasing one of our S2 clutch kits for your 2016-23 RZR XP 1000, RZR S 1000 or Trail S 1000, General, or RZR 900 S/Trail/XC
- Replace simply by using a punch to pound out roll pins & roller pin.
- Install new rollers on new roller pin, then re-insert the small roll pins back into the clutch after aligning the roll pin.
- Rollers will also fit on the inside clutch hub that has rollers from the factory.
- The inside rollers normally last a longer time, but these are great replacements.
Installation Instructions:
Fitment:
- Fits 2016-Up RZR models with the square slider BOSS secondary clutch (See picture 2 for reference)
