Spring Brake Thingy 2010+ Polaris RZR 800 Parking Brake
FITMENT:
- 2010+ Polaris RZR 800
The Spring Brake Thingy Parking Brake fits Polaris RZR 800 machines from 2010 and newer.
Installation is quick and simple, taking only 2–3 minutes. Just back out the 13mm nuts on the master cylinder behind the brake pedal, install the Spring Brake Thingy, and reinstall and tighten the nuts.
To operate, press the brake pedal with your right foot and use your left foot to slide the lever over the brake pedal arm, engaging all four brakes. For added security, you can use your own 1/4" to 5/16" shaft padlock once the brake is engaged.
To release, simply unlock and remove the padlock, then press the brake pedal.
NOTE:
- ALWAYS USE PARK WITH THE SPRING BRAKE THINGY AND MAKE SURE YOUR BRAKES ARE IN GOOD WORKING CONDITION.
