Skip to main content
Shipping from 12 warehouses nationwide

International Shipping

  • Finland
  • France
  • Gabon
  • United Arab Emirates
  • United Kingdom
  • Puerto Rico
  • Peru
760 746 0600

(Mon - Fri 8:00 am - 5:00 pm PST)

RPM Powersports - CFMOTO Zforce Z10 Silicone Charge Tube Kit

(No reviews yet) Write a Review
$148.45
MSRP: $179.94
You save - $31.49 (17.50%)
item#:
RPM-SKT-CF-2

RPM CFMoto Z10 5-Ply Silicone Charge Tube Kit

A performance upgrade essential for stock, tuned, and high-power machines!

Replace your fragile OEM plastic and rubber plumbing with a high-flow charge tube setup. The factory charge system uses cheap, brittle materials that are prone to heat soak, expansion, cracking, and boost leaks under high pressure and extreme conditions.

Redesigned & Re-Routed for Maximum Airflow

These are NOT simple factory-replicated silicone tubes. RPM's engineering team has completely re-engineered the plumbing, eliminating restrictive factory kinks and sharp bends. This design reduces the number of joint clamps and connection points by half, significantly lowering potential boost leak paths and failure points.

Made from ultra-heavy-duty 5-ply wire-reinforced silicone, the charge tube features an internal wire coil that prevents swelling, expansion, or bursting under extreme heat or boost pressures. The high-temperature fluorolined inner wall resists oil and fuel degradation, while the smooth, port-matched wall profile minimizes internal air turbulence, enhancing air velocity for quicker turbo spool and improved throttle response.

The kit includes a precision CNC-machined 6061 billet MAP sensor flange, heavy-duty ABS barbed hose ports, and an upgraded 1" (25mm) BOV port for better pressure relief efficiency. Each kit comes with a pre-installed 6mm boost reference port for easy connection to an aftermarket boost gauge or external reference line. All tubes are secured with high-grade stainless steel HD worm clamps for a reliable, blowout-proof seal.

Customizable Blow-Off Valve (BOV) Configurations:

Our primary charge tube is available in customizable BOV configurations that can be recirculated or vented to atmosphere (VTA):

  1. No BOV / Use Your Own: If you have a preferred 1" (25mm) blow-off valve, select this option to receive the primary charge tube and plumbing kit ready for your existing valve.
  2. Factory Electric BOV Adapter: Includes a CNC-machined 6061 billet aluminum adapter to retain your OEM electronic blow-off valve while utilizing our durable 5-ply silicone charge tube.
  3. RPM SxS V2 Mechanical BOV Upgrade: This high-performance option upgrades your system to our V2 billet mechanical blow-off valve kit, designed to hold higher boost and eliminate compressor surge. It includes a TMAP sensor adapter for direct boost reference and a CFMoto Electronic BOV Bypass Connector to maintain proper ECM resistance and deliver an aggressive RPM sound on deceleration.
  • Heavy-Duty 5-Ply Wire-Reinforced Silicone: Resists swelling, flexing, or bursting under high boost and temperatures.
  • Streamlined Single-Piece Primary Design: Reduces connection points and clamp count to eliminate common boost leak issues.
  • Fluorolined Inner Wall: Smooth, port-matched inner bore resists oil and fuel degradation while maximizing air velocity.
  • Billet 6061 MAP Sensor Flange: Integrated precision CNC 6061 billet MAP sensor mount.
  • Billet 6061 Boost Reference Adapter: Simple bolt-on application, no modifications needed (Included with RPM Mechanical BOV Kit).
  • Upgraded 1" (25mm) BOV Port: Replaces small factory plumbing for superior pressure relief.
  • Pre-Capped 6mm Boost Reference Port: Ready for optional boost gauge or reference line connections.
  • CFMoto Electronic BOV Bypass Connector: Included with Mechanical BOV option to bypass factory wiring without triggering Check Engine Lights.
  • ABS Barbed Hose Ports & Stainless Clamps: Premium ports and high-grade stainless steel clamps for a leak-free seal.
  • Versatile BOV Options: Choose from No BOV (BYO), OEM Electric BOV Adapter, or RPM V2 Mechanical BOV.
  • 100% Complete Kit: Includes primary charge tube, recirculation hose, stainless clamps, and all necessary caps and hardware for recirculated or VTA setups.
  • Direct Bolt-On Fitment: 100% direct OEM replacement with no cutting or permanent modifications required.


Fits The Following Vehicles

  • 2027 ZFORCE Z10
  • 2027 ZFORCE Z10-4
  • 2026 ZFORCE Z10
  • 2026 ZFORCE Z10-4