RPM Powersports 2026-2027 CFMoto ZForce Z10 Silicone Intake and Charge Tube Kit
Fitment:
- 2026-2027 CFMoto ZForce Z10 (2 & 4 Seater)
The RPM High-Flow Silicone Charge and Intake Tube Kit for the CFMOTO Z10 is a major performance and reliability upgrade for stock, tuned, and high-horsepower machines.
Designed to replace failure-prone factory plastic and rubber plumbing, this completely re-engineered system improves airflow while helping prevent common issues caused by heat, expansion, cracking, and boost leaks. RPM redesigned and rerouted the plumbing to eliminate restrictive factory bends and kinks while reducing clamps and connection points by approximately 50%, minimizing potential leak points and improving reliability.
Constructed from heavy-duty 5-ply wire-reinforced silicone, the tubes resist swelling, collapsing, and bursting under extreme heat and boost pressure. The high-temperature fluorolined inner wall resists oil and fuel degradation while maintaining a smooth interior for improved airflow, faster turbo spool, and sharper throttle response.
Additional features include a CNC-machined 6061 billet MAP sensor flange, heavy-duty ABS barbed hose ports, an upgraded 1-inch BOV port (replacing the restrictive 16mm factory plumbing), and a pre-installed 6mm boost reference port for connecting an aftermarket boost gauge or external reference line. High-grade stainless steel HD worm clamps are included for secure installation.
Options:
- No BOV / Use Your Own: Includes the complete silicone intake and charge tube master kit, ready to pair with your existing 1" (25mm) RPM or aftermarket blow-off valve.
- Factory Electric BOV Adapter: Includes a CNC-machined 6061 billet aluminum adapter that allows you to retain your factory electronic blow-off valve while upgrading to the heavy-duty 5-ply silicone charge tube system.
- RPM SxS V2 Mechanical BOV Upgrade: Upgrades to an anodized 6061 billet mechanical blow-off valve with dual-stage springs for improved pressure release, higher boost capability, and compressor surge prevention. Includes a billet TMAP sensor adapter and CFMOTO electronic BOV bypass connector to maintain proper ECM resistance and prevent check engine lights.
-
Heavy-Duty 5-Ply Wire-Reinforced Silicone: Engineered for extreme heat resistance with zero swell, flex, or burst under high boost.
-
RPM Re-Engineered Flow Paths: Completely re-routed design smooths out sharp bends and cuts factory joint connections in half.
-
Fluorolined Inner Bore: Ultra-smooth, port-matched inner wall resists oil/fuel degradation while maximizing air velocity.
-
Billet 6061 MAP Sensor Flange: Precision CNC 6061 billet MAP sensor flange integrated directly into the silicone tube.
- Billet 6061 Boost Reference Adapter: Simple bolt on application, no modifications required (Included with RPM Mechanical BOV Kit)
- Upgraded 1" (25mm) BOV Port: Standard 1" port replaces small 16mm factory plumbing for superior pressure relief efficiency.
- 6mm Boost Reference Port: Ready out of the box for optional boost gauge or reference line hookups.
-
CFMoto Electronic BOV Bypass Connector: Included with Mechanical BOV option to safely bypass factory wiring without triggering Check Engine Lights.
-
ABS Barbed Hose Ports & HD Stainless Clamps: Premium barbed ports and a full set of high-grade stainless clamps included for a leak-free setup.
-
Versatile BOV Options: Run your choice of No BOV (BYO), OEM Electronic BOV Adapter, or RPM V2 Mechanical BOV.
-
100% Complete Kit: Includes (1) Silicone Intake Tube, (1) Primary Charge Tube with BOV Option, (1) Recirculation Tube for BOV, and (1) Secondary Charge Tube, plus all required HD stainless clamps, caps, and VTA plugs.
-
Direct Bolt-On Fitment: 100% direct OEM replacement with zero cutting, trimming, or permanent chassis modifications required.