Product Information
Simple Solutions to a tough problem.
Easily slide and install these Maverick X3 Tie Down Tabs to the stock locations on your X3.
Powder-coated Textured black to match the X3’s finish on most models.
Made from 1/4" thick 100XF steel to hold strong on the road, allowing you to securely fasten your rig.
CA Prop 65 Warning
This product can expose you to chemicals including carbon black, lead, silica - crystalline, which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
UHMW stands for Ultra High Molecular Weight and is the plastic Factory UTV uses to create skid plates, a-arm guards, and rockslides for just about every major UTV model on the market.
During its manufacturing process, the molecules of this plastic are compacted as densely and close together as possible. UHMW is roughly 100 times denser than HMW, and exponentially denser than ABS or other common plastics.
The UHMW used by Factory UTV is partially made from Recycled UHMW materials, making the constancy more rigid and impact-absorbent than new plastic, allowing the perfect flexing capability needed to endure impacts. Our UHMW has a very low coefficient of friction, making it slippery in rough conditions, but it has the impact resistance and density to withstand some of the harshest environments you can throw at it.
| Can-Am Maverick X3 | 2026 Maverick X3 | 2026 Maverick X3 MAX | 2025 Maverick X3 | 2025 Maverick X3 MAX | 2024 Maverick X3 | 2024 Maverick X3 MAX | 2023 Maverick X3 | 2023 Maverick X3 MAX | 2022 Maverick X3 | 2022 Maverick X3 MAX | 2021 Maverick X3 | 2021 Maverick X3 MAX | 2020 Maverick X3 | 2020 Maverick X3 MAX | 2019 Maverick X3 | 2019 Maverick X3 MAX | 2018 Maverick X3 | 2018 Maverick X3 MAX | 2017 Maverick X3 | 2017 Maverick X3 MAX |
|---|
