Evolution Powersports - Can-Am Maverick R EVP High Flow Intake (HFI) Kit

Extend your engine's power output potential with the EVP High Flow Intake (HFI) Kit for the Can-Am Maverick R. The OEM Donaldson-style intake is restrictive, and the short intake tube from the airbox to the turbocharger does not properly smooth airflow, leading to reduced efficiency and power loss. The EVP HFI solves these issues, providing up to 23 WHP over the factory airbox at 9000 RPMs on the X85 DCT+ tune.

The EVP HFI filter is located in the high-pressure zone of the OEM intercooler ducting and works with both firewall-vented intercooler ducting and the OEM roof scoop. It has been tested with and fits the stock turbocharger and the P47 turbo upgrade. The USA-manufactured filter features 2x the filtration media of the OEM filter. The integrated ram air venturi system provides smooth airflow to the turbocharger, increasing efficiency. The silicone connector hose is oversized and wire-reinforced to maintain shape under demanding conditions.

Note: Power gains were achieved on a race version of the X85 tune with raised rev limits and higher shift points. The vehicle also had a full EVP exhaust system.

Kit Includes:

• EVP Intake Tube
• EVP High Flow Air Filter and Pre Filter
• EVP Venturi and Brackets
• Additional Hardware

Features:

• More HP and faster spooling turbocharger characteristics
• Way less restriction with 2x the normal air filter size
• Reinforced silicone allowing for no collapsing
• Built-in valve cover breather port and boost recirculating port
• Includes all hardware necessary for installation

Fitment: 2024+ Can-Am Maverick R

Maintenance:

• Air filter maintenance should be adjusted according to riding conditions
• Air filter maintenance must be increased in frequency when riding on snow, dry sand, dirt, gravel, or similar conditions that have high dust or particle dispersion
• Riding in a group in these conditions will require increasing air filter maintenance frequency further
• Inspect the filter for any signs of leaks. A streak of dust on the clean side of the filter is a telltale sign. Replace filter if there is any damage. Eliminate any source of air leaks before installing a new filter
• Clean engine air filter by tapping out heavy dust from paper element to allow dirt and dust to exit the paper filter

Intake Disclaimer: This intake product may be intended for off-road or competition use only unless otherwise stated. Installation may affect emissions compliance and vehicle legality in certain jurisdictions. Buyer is responsible for confirming legal use and proper application before purchase or installation.