Evolution Powersports - Can-Am Maverick X3 / X3 MAX XR Series High Flow Intake (HFI) Kit

The EVP XR Series High Flow Intake (HFI) Kit for Can-Am Maverick X3 turbo (all models except XMR) delivers smooth, undisturbed airflow to the turbocharger, increasing power output. Gain upwards of 15 HP when paired with EVP DS-355 or higher turbo systems, or 5-10 HP on stock turbo applications.

The XR Series HFI eliminates unnecessary clutter and weight by replacing the OEM airbox and tray with a more aggressive, race-ready setup. This also significantly eases plug changes and other maintenance tasks.

Turbochargers are most efficient when air entering the inlet has minimal restriction. The OEM airbox design is restrictive and creates turbulent airflow to the compressor section. EVP's proprietary XR Series HFI design offers three kits tailored for Stock turbochargers, EVP Paragon or Dynomite turbo systems, and EVP Desert Storm turbo systems. All kits include a low-restriction/high-flow filter element, EVP pre-filter, smooth silicone elbow tubes with gradual diameter taper, mounting bracket, and hardware.

Required EVP Parts for Installation:

• EVP X3 Bed Delete Kit
• EVP X3 Intercooler Tip-Up Bracket
• EVP X3 High-Volume Coolant Reservoir Tank
• EVP X3 High-Volume Coolant Relocation Brackets
• EVP X3 Scatter Shield (or aftermarket)

Features:

• Three unique kits available for Stock Turbo, EVP Paragon or Dynomite Turbo Systems, and EVP Desert Storm Turbo Systems
• Provides uninterrupted airflow to the turbo inlet for significantly enhanced power
• Eliminates clutter by replacing the OEM airbox, CVT ducts/housing, and airbox tray
• Makes plug changes and other maintenance hassle-free
• Includes EVP HFI Filter and Pre-Filter

Kit Includes:

• EVP HFI Air Filter with Pre-Filter
• XR Series HFI Mounting Bracket
• Silicone Hose Connector
• Full hardware installation kit

Fitment: 2017+ Can-Am Maverick X3 Models (except XMR)

Maintenance:

• Air filter maintenance should be adjusted according to riding conditions
• Increase maintenance frequency when riding on snow, dry sand, dirt, gravel, or similar high-dust conditions
• Riding in a group in these conditions requires further increased maintenance frequency
• Inspect the filter for signs of leaks; a dust streak on the clean side indicates a problem
• Replace filter if damaged; eliminate any air leak sources before installing a new filter
• Clean the engine air filter by tapping out heavy dust from the paper element
• Replacement air filters are available separately

This intake product may be intended for off-road or competition use only. Installation may affect emissions compliance and vehicle legality in certain jurisdictions. Buyer is responsible for confirming legal use and proper application before purchase or installation.