AVID UTV - Can-Am Maverick R / R MAX Front Upper Control Arm Inner Pivot Gusset Kit

This front upper control arm inner pivot gusset kit reinforces the factory upper A-arm mounting points on the Can-Am Maverick R, adding support where the upper arms connect to the chassis.

The kit combines laser-cut 3/16-inch 4130 chromoly gusset plates with machined weld washers. The washers pass through the factory pivot brackets to support the control arm bolts, while the gusset plates tie the mounts into the surrounding chassis.

• Reinforces the left and right front upper control arm inner mounting points
• Laser-cut 3/16-inch 4130 chromoly gusset plates
• Machined weld washers that pass through the factory pivot brackets
• Weld-on connection between the upper arm mounts and chassis

• Left and right upper control arm inner pivot gusset plates
• Machined weld washers

Designed for the Can-Am Maverick R. Installation requires welding plus drilling or cutting. Have the kit installed by a qualified fabricator or chassis shop. Remove paint or coating from the weld areas before installation.