Spring Brake Thingy Polaris RZR Pro XP | Pro R | Pro S | Turbo R Parking Brake
Fitment:
- All Polaris RZR PRO Series
- Polaris RZR Pro XP
- Polaris RZR Pro R
- Polaris RZR Pro S
- Polaris RZR Turbo R
The Spring Brake Thingy Parking Brake fits all Polaris PRO XP, PRO R, S, and TURBO R models.
It features pre-machined holes that allow you to add a padlock for extra security and theft deterrence. Installation is quick and easy, taking only 2–3 minutes. Simply back out the 15mm nuts on the master cylinder behind the brake pedal, install the Spring Brake Thingy, and reinstall and tighten the nuts.
To operate, press the brake pedal with your right foot and use your left foot to slide the lever over the brake pedal arm, engaging all four brakes. For added security, insert your own 1/4" to 5/16" shaft padlock once the brake is engaged.
To release, simply unlock and remove the padlock, then press the brake pedal.
NOTE:
- ALWAYS USE PARK WITH THE SPRING BRAKE THINGY AND MAKE SURE YOUR BRAKES ARE IN GOOD WORKING CONDITION.
