Shock Therapy - Polaris RZR XP 1000 / 4 XP 1000 Non Turbo Front Sway Bar Kit

This Kit Fits:

2014-2018 RZR XP 1000 2/4 seat non-turbo models and 2017-2022 Trail and Rocks Edition model years

This front anti-sway bar system is completely bolt-on with no welding required. The front bumper is not needed. The system is infinitely adjustable with 3 settings on the bar itself, plus the ability to move the arm clamp up and down the arm for fine tuning. Tested extensively over 2,500+ miles in desert, rock, and dune conditions, as well as in short course and desert racing.

Advantages:

• Less front-end body roll
• More high-speed stability
• Higher corner speeds
• Four-wheel drifts in appropriate terrain
• Less tendency to pick the inside rear tire off the ground in turns
• Faster lap times

Considerations:

• Less suspension independence in serious rock crawling
• For rock crawling, disconnect a sway bar link and reattach when finished

Installation and Options:

Installation takes approximately one hour. Billet arm clamps are available in stock size 1" as well as 1.1" and 1.25" to work with aftermarket arms and long-travel kits. A universal winch plate is available for use with this sway bar kit if you have a winch on your XP.

Important: You must specify if you have aftermarket lower A-arms and their tubing diameter for the billet clamps to fit properly.