S&S 2020-2023 Kawasaki KRX (4 Seater) Turbocharger Kit
The S&S Off Road Division KRX Turbo Kit is now available for the 4-seat KRX, delivering up to a 50% increase in horsepower and cutting 0–60 mph times from the factory 11.5 seconds to just 6.2 seconds.
The kit includes a large, fan-cooled air-to-air intercooler, 9:1 compression pistons designed to run 10 PSI of boost, and a pre-loaded PV3 tuner.
It also includes a tuned plenum, larger fuel injectors, fuel rail, and properly rated spark plugs - all packaged in a factory-style setup.
With hundreds of hours of durability testing, this complete kit is designed to deliver serious performance while maintaining the reliability you expect from a properly engineered turbo system.
Features:
- 50%+ increase in horsepower over factory
- 0-60 in 7s vs. 11.5s stock
- Tuned for 10 psi of boost
- 9:1 compression ratio, forged piston kit (OEM 11.5:1)
- Fits two seater only
- Full size aluminum intercooler
- All stainless steel air tubes with silicone couplers
- Blow-off valve and 3 Bar map sensor included
- Includes PV3 tuning device
- Custom Rotomolded Intake Plenum
- High Capacity billet fuel rail with fuel damper
- 900 cc/min injectors
- Includes ALL mounting hardware and brackets
- Kit can be used with Kawasaki Sport roof, Kawasaki Alternator Kit and Kawasaki Spare tire rack
- XTO muffler with 2.25” outlets
- Flyweight rivets, compatible with stock flyweights
- Breather relocation bracket
- KQR Sport Roof mount relocation bracket
- All necessary fasteners, gaskets, and hardware
- “Turbo” Decals
- Install instructions
- Turbo, set to 10 psi of boost pressure
- Forged, low compression pistons
- Camshaft sprockets
- Heat range 10 spark plugs
- Intercooler with dual cooling fans
- Intercooler fan electrical harness
- High flow fuel injectors, 900 cc/min
- High flow fuel filter
- Large volume billet aluminum fuel rail
- Rotomolded high pressure intake air plenum
- 2” stainless steel charge air tubes
- Silicone 4 ply couplers
- Billet aluminum blow off valve
- Turbo oil supply and drain tubes, with oil fill adaptor
- 2.5” stainless steel exhaust with flex bellows and v-band connection
