S&B 2012-2019 Arctic Cat Wildcat Replacement Filter
Fitment:
- 2012-2019 Arctic Cat Wildcat
S&B’s dry, cleanable air filter provides excellent airflow and a 99.98% efficiency rating, compared to 99.42% for the stock filter.
When the filter gets dirty, it can be cleaned and reused with these simple steps.
Easy Filter Cleaning:
- Step 1 – Remove Debris
Wear protective eyewear. Remove the filter from the UTV airbox and gently tap the top of the filter on a hard surface to remove loose dirt and debris. Be careful not to damage the pleats or cage. - Step 2 – Blow Out the Filter
Using an OSHA-approved regulator set to 30 PSI or less, blow air from the inside out. Keep the nozzle at least 1 inch away from the filter media and keep it moving to avoid damaging one area. - Step 3 – Remove Remaining Dirt
Blow air across the outside of the filter at an angle to remove larger debris. Then blow through the filter from the inside out one more time. - Step 4 – Wash the Inside
Using a garden hose at about 75% water pressure, wash the filter from the inside out. - Step 5 – Wash the Outside & Dry
Wash the outside of the filter to remove any remaining dirt. Repeat Steps 4 and 5 until the filter is close to its original white color. Allow the filter to fully air dry before use. A small fan can help speed up drying, but do not use hot air.
IMPORTANT:
- If the filter media or rubber is damaged, DO NOT reuse the filter.
