Ricochet Offroad - Polaris Ranger Crew XP 1000 Dump Bed Lock Kit

Stop Your Dump Bed From Dumping Itself

Factory dump beds rely on the stock latch or lift mechanism to hold the bed closed, and that's not always enough. Rear-loaded cargo, worn hardware, or rough trails can be enough to let the bed creep open with no warning. The Dump Bed Lock Kit replaces that risk with a real mechanical lock. A heavy-duty steel bracket and locking pin hold the bed firmly in the closed position, and the bed cannot lift or dump until you manually pull the pin. No more surprise dumps, no more wondering if the latch is going to hold on the next rough trail.

Built Stronger Where It Counts

This is not a flimsy add-on latch. The brackets are cut from heavier gauge steel than the factory hardware and finished with a zinc/galvanized coating to resist corrosion in wet, muddy, or salted conditions. The locking pin threads through both brackets and is secured with a retention clip, so the only way the bed opens is if you manually pull the pin yourself. Engaging the lock takes seconds: bolt on the brackets, drop in the pin, and secure it with the retention clip. To dump the bed, simply pull the clip and remove the pin. It is a simple, positive-lock design with no springs or friction points to wear out over time.

Bolt-On Install, No Drilling Required

The kit bolts directly to your existing hardware using the factory mounting points, so there is no drilling and no permanent modification to your machine. Most owners have it installed in well under an hour with basic hand tools.

Confirmed Fitment

• Ranger 570 Full-Size, XP 570
• Ranger Crew 570-4, Crew 570-6
• Ranger 1000, Crew 1000
• Ranger XP 1000, Crew XP 1000 (including High Lifter and Trail Boss / NorthStar Trail Boss editions)

What's Included

• 2x mounting brackets (steel, zinc/galvanized coated)
• 1x locking pin with retention clip
• Mounting hardware

Made in the USA.