Polaris Midsize Ranger Multi-Mount Winch Kit

Brand new "KFI" Multi-Mount kit for the following Polaris ATV's:

• All Polaris Midsize Ranger 400
• All Polaris Midsize Ranger EV
• 2011-2013 Polaris Midsize Ranger 500
• 2014 Polaris Ranger Midsize 570
• 2013-2014 Polaris Midsize Ranger 800

Kit includes the following:

• (1) Front upper 2" Receiver that mounts in the location shown in the picture (#100875)
• (1) 2" receiver Winch Mount (#100620)
• (1) 20" Quick Connect that gets wired to your winch leads (#QC-20)
• (1) 48" Quick Connect that goes from your winch contactor to the front of your Ranger (#QC-48)
• (1) 120" Quick Connect that goes from your winch contactor to the rear of your Ranger (#QC-120)
• (1) Standard 5/8" Hitch Pin

Designed to work with the following winches:

(Note: This mount requires a Roller Fairlead Bracket that comes with most of the winches out there. If your winch kit did not come with a fairlead bracket you will need KFI part #100495 )

• KFI: ST17 / S2000 / A2500 / A3000 / U4500 / U4500w / SE25 / SE35 / SE45 / SE45w
• WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce
• WARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30
• WARN: Vantage 2000-3000lbs / Provantage 2500-3500lbs
• WARN: RT40 / XT40
• WARN: Vantage 4000lbs / Provantage 4500lbs
• RAMSEY : ATV2500 / ATV3000
• SUPERWINCH : Terra25 / Terra35 / Terra 45 / LT2000 / LT2500 / LT3000
• MILE MARKER : PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500
• MASTER LOCK : 1500lbs #2955AT
      - Requires a Fairlead with a 4.875" Bolt Pattern (available if needed #ATV-RF)
• CYCLE COUNTRY : Work Power 1500 and 2500 / Powermax 2500 and 3500
• BADLAND : 2000lb #68146
      - Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed #ATV-RF)
      - Listed Models come with incorrect ATV Roller Fairleads
• BADLAND : 3000lb #68145 / 5000lb #68144
• CHAMPION : C10013 / C10014 / C10018 / 10020 / 10024 / 12053 / 12503 / 13501(reqires rollers) / 14061
• CHAMPION : 14501 / 14551 / 14552 / 40252 (4500lbs)
• CHAMPION : 10028 / 10032 / 12001 / 12002 / 13001 / 20049 / 20051 / 20249 / 30045 / 30145
      - Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed #ATV-RF)
      - Listed Models come with incorrect ATV Roller Fairleads
• CHAMPION: 14001 and 14061
• SMITTYBILT : XRC 2.0
      - Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed #ATV-RF)
      - Listed Models come with incorrect ATV Roller Fairleads
• SMITTYBILT : XRC 3.0
• XGEAR: X3000 / X4000
      - 4-Hole Standard (3.00" x 4.875" bolt pattern)
• KEEPER CORP. TRAKKER : KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C
• VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)
      - All with 3.00" x 4.875" Bolt Pattern mount-up
      - All with 3.00" x 6.600" Bolt Pattern mount-up
• Possibly Many others with the below standard Mounting patterns (call to confirm)
      - 4-Hole (3.00" x 4.875" bolt pattern with Rollers that are 4.875" bolt pattern)
      - 4-Hole WIDE (3.00" x 6.60" bolt pattern with Rollers that are 6.600" or 6.000" bolt pattern)
      - 2-Hole (3.10" with Rollers that are 4.875" bolt pattern)

Specifications:

• 100% MADE IN USA
• Constructed of 3/16" steel
• Unlike all other competitors our products are metal bead blasted before they are powder coated for the best possible finish prep
• Powder coated black for supreme durability
• Complete installation instructions included
• All mounting hardware included
• Satisfaction guaranteed
• Roller fairlead and winch not included

Usually ships in 3-4 business days