2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket.
The High Lifter Arched Rear Radius Bars make a great addition to the rear suspension of any RZR XP 1000. Made right here in the USA, unlike some other brands the RZR 1000 and strong and durable take your UTV from stock to super. If you ride on trails where clearing rocks and debris is necessary don't take the risk with your stock Radius Rods. There is a reason Polaris themselves partnered with High Lifter to make a special edition RZR XP 1000.
A bent rear radius bar on your RZR 1000 XP will hinder your ground clearance and can quickly lead to getting stuck because you're hung in a rut or on a rock or a shortened ride. High Lifter maximized the available space in the rear radius bar area with extreme curvatures to give you the most ground clearance AND still protect your axle with the Max Clearance Series Radius Bar.
Features
The High Lifter Arched Rear Radius Bars make a great addition to the rear suspension of any RZR XP 1000. Made right here in the USA, unlike some other brands the RZR 1000 and strong and durable take your UTV from stock to super. If you ride on trails where clearing rocks and debris is necessary don't take the risk with your stock Radius Rods. There is a reason Polaris themselves partnered with High Lifter to make a special edition RZR XP 1000.
A bent rear radius bar on your RZR 1000 XP will hinder your ground clearance and can quickly lead to getting stuck because you're hung in a rut or on a rock or a shortened ride. High Lifter maximized the available space in the rear radius bar area with extreme curvatures to give you the most ground clearance AND still protect your axle with the Max Clearance Series Radius Bar.
Features
- Extreme arches for maximum ground clearance.
- 1 1/2" x 3/16 1/2" DOM steel tubing
- 5/8 1/2" heim joint with a load rating of 17,955 pounds
- Polyurethane bushings
- Simple bolt-on kit
- Instructions complete with photos for a quick install
*** Note: If you are running the lower radius bar kit with the stock trailing arm, you will need to trim the trailing arm. Instructions for this are included in the product manual. This radius bar kit will NOT work with the rear Polaris Bumper. ***
Usually ships in 1-2 business days
