LM UTV - Can-Am Maverick R / R MAX Rear Radius Rod Nut Plate

The LM-UTV Can-Am Maverick R rear radius rod nut plate is a direct replacement designed to fix a known OEM weak point.

The stock Maverick R rear nut plates are thin steel with a single nut and one small tack weld. The first time you pull your radius rods, the weld often fails. Once it spins, you cannot torque the bolt.

Welding causes heat damage that warps the plate and damages threads. A broken weld results in a spinning nut with no way to secure the bolt.

The 3-piece captured nut plate design eliminates these failure points. The nut is fully captured and floats freely, allowing it to self-center as the bolt is driven in — no cross-threading, no fighting alignment. No welding means no heat damage to threads or the plate. If threads are ever damaged, the plate comes apart easily so you can replace just the nut.

Competing nut plates that don't fully capture the nut cause frustration during installation — nuts fall out while working underneath the machine. This design keeps the nut in place for hassle-free installation.

• 3-piece captured nut design — nut floats and self-centers for easy installation
• Fully captured nut — stays in place during install
• No welding — eliminates thread damage, plate warping, and weld failures
• Serviceable — disassemble and replace nut if threads are damaged
• Steel construction with zinc-plated hardware
• Black powder coat finish
• USA designed and manufactured
• Fits all Can-Am Maverick R years and models at rear radius rod mounting location