Get the most out of your Mule Pro Series with the 4" Lift from GR Manufacturing. This kit is a bracket style kit that moves the stock shock mounting points to provide an additional 4" lift. This kit provides a true 4" of lift with the stock tires. If you install this kit with larger tires you will actually gain even more ground clearance.
GR uses only durable steel for its brackets, which are actually about twice as thick as the stock mount points on the Mule. Durability is not in question with this kit, as over 300 hours of testing and R&D were implemented before the kit was allowed to go to public.
28" tires are the largest you can run with this lift kit, not because of the lift itself, the lift actually provides enough room for tires larger than 28", however the rear axle is offset forward so any tire with a diameter larger than 28" will rub on the fronts of the rear fender well.
Fits: 2015+ Mule Pro-FX , Mule Pro-FXT, Mule Pro-DX and Pro-DXT
GR uses only durable steel for its brackets, which are actually about twice as thick as the stock mount points on the Mule. Durability is not in question with this kit, as over 300 hours of testing and R&D were implemented before the kit was allowed to go to public.
28" tires are the largest you can run with this lift kit, not because of the lift itself, the lift actually provides enough room for tires larger than 28", however the rear axle is offset forward so any tire with a diameter larger than 28" will rub on the fronts of the rear fender well.
Fits: 2015+ Mule Pro-FX , Mule Pro-FXT, Mule Pro-DX and Pro-DXT
- Installs is simple and easy, no specialty tools required
- Typically takes 1-2 hours to install
- Made from durable steel and powdercoated black
- No other modifications necessary, works with stock a-arms, suspension and cv axles
- Keeps the ride quality of the stock machine, does not lessen quality
- Made in the USA
