Ice Crusher Heaters | 2013-2020 Polaris Ranger XP 900 / 900 Cab Heater Kit
Fitment:
- 2020 Polaris Ranger XP 900 / 900
- 2019 Polaris Ranger XP 900 / 900
- 2018 Polaris Ranger XP 900 / 900
- 2017 Polaris Ranger XP 900 / 900
- 2016 Polaris Ranger XP 900 / 900
- 2015 Polaris Ranger XP 900 / 900
- 2014 Polaris Ranger XP 900 / 900
- 2013 Polaris Ranger XP 900 / 900
Are frosted windshields and freezing seats ruining your outdoor adventures? Ice Crusher UTV Heaters has the solution.
Each kit is designed for the average DIYer and comes with all the hardware, fittings, hoses, and specialty tools you need. Step-by-step, picture-rich instructions make installation easy and straightforward.
With adjustable vents and a high-CFM blower, the heater keeps your windshield clear and warms your hands and feet. Plus, our Minnesota-based technical support team is always available to help if you get stuck.
Bring comfort and fun back to your off-road trips with an Ice Crusher UTV Heater.
Specs:
- 14,600 BTU output
- CFM: 180
- Heater unit dimensions (10 x 7.5 x 4.5)
- Mounts under the center dash
- Vents: 6
- Defrost: Yes
- MaxStat Size: Not Applicable
2 Seat / 4 Seat Option:
Select 2 Seat if your vehicle has a single row of seats and 4 Seat if your vehicle has two rows of seats.
When you choose this option it helps our shipping department determine the amount of coolant hose to add to your order. It will not affect pricing at all.
In-Cab Heat Control Option:
This essentially gives you full control over the coolant flow through the heater core.
You can turn the temperature up and down or turn it completely off for the summer, without having to reach under the hood to access the shut-off valve that is normally supplied with the heater kit.
Hose Clamp Off Pliers Option:
Make your heater install faster and easier with Ice Crusher Hose Clamp Off Pliers.
These clamp off pliers will keep coolant from pouring out of your vehicle when tying into the coolant system. They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later.
It will fit all UTV applications and great to use on radiator hoses. Kits are sold in a pair.
- It seals-off flexible hoses up to 2" inch in diameter
- 10" in overall length
- Dimensions 12.5 x 3.5 x 1 inches
