Ice Crusher Heaters Polaris Ranger ETX Cab Heater Kit |
Fitment:
- 2017 Ranger Midsize ETX
- 2016 Ranger Midsize ETX
- 2015 Ranger Midsize ETX
Tired of frosted windshields and freezing seats ruining your outdoor adventures?
Ice Crusher UTV Heaters have you covered. Designed for the average DIYer, each kit includes all hardware, fittings, hoses, specialty tools, and step-by-step, picture-rich instructions for easy installation. Adjustable vents and a high-CFM blower deliver plenty of heat to defrost your windshield and warm your hands and feet.
Plus, our Minnesota-based technical support team is always ready to help. Get back to enjoying the outdoors with an Ice Crusher UTV Heater!
Features:
- 14,600 BTU output
- CFM: 180
- Heater unit dimensions (10 x 7.5 x 4.5)
- Mounts along firewall behind center console
- Vents: 6
- Defrost: Yes
- Get 10 to 15 degrees more heat with the addition of the MaxStat
Electronic Module On Frame Option:
- Some vehicles have an electronic control module mounted to the front cross frame support (See pictures), select YES if unsure
MaxStat - Inline Coolant Bypass Thermostat Option:
All heaters in the industry perform as a function of how hot the coolant is and how much coolant is flowing through the heater core. As the radiator cools down the engine, it causes the engine thermostat to close, which cuts off all coolant flow to the heater core.
The MaxStat adds a secondary inline thermostat (180F Standard) to the vehicle’s coolant system, which diverts coolant to the heater core when the engine thermostat would otherwise have closed down. Essentially it eliminates the thermal cycling that affects almost all heaters in the market.
Optional 192F thermostat is available if requested before shipping.
- MaxStat Size: 1" (26mm)
Hose Clamp Off Pliers Option:
Make your heater install faster and easier with Ice Crusher Hose Clamp Off Pliers. These clamp off pliers will keep coolant from pouring out of your vehicle when tying into the coolant system.
They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later. It will fit all UTV applications and great to use on radiator hoses. Kits are sold in a pair.
- It seals-off flexible hoses up to 2" inch in diameter
- 10" in overall length
- Dimensions 12.5 x 3.5 x 1 inches
