HighLifter | 2015 Polaris Ranger 570 (Mid-Size) Front Forward Lower Control Arms
Fitment:
- 2015 Polaris Mid Size Ranger ETX
- 2015 Polaris Mid Size Ranger 570
- 2015 Polaris Mid Size Ranger 570 Crew
- 2015 Polaris Mid Size Ranger 570 Crew EPS
These control arms are designed to increase ground clearance by using a carefully shaped arch that follows the angle of the axle.
This design helps protect your axles while improving clearance and giving your machine a clean, aggressive look. Unlike overly arched designs that can put extra stress on axles, these are built to balance performance and durability. Each arm is precision-made to fit just like the factory part, and many models feature the High Lifter logo cut directly into the bracing.
Installation is straightforward with step-by-step instructions and helpful images. You can reuse your stock bushings and ball joints, or choose to have ball joints pre-installed before shipping for an even easier setup.
It’s a good idea to check your bearings, bushings, ball joints, and brakes before installing, and replace any worn parts to save time and avoid extra work later.
Features:
- 25% larger than average stock arms - Crafted from 1 & 1/4" DOM steel
- Up to 2.5x the wall thickness of an average stock arms - .188" wall thickness
- Grease fittings included for most models
- Added ground clearance featuring bends that maximize clearance and axle protection
- Most stock powder coat colors available in stock
- Easy to install and maintain
- Limited Lifetime Warranty
***NOTES:
- Be sure to CHECK for worn ball joints, bearings, and bushings before installation and REPLACE them if needed.
- This is a forward arm kit that ONLY comes with two lower control arms and grease fittings.
- This kit comes with control arms ONLY - NO ball joints.
