HighLifter 2017-2026 Polaris General | RZR Trail, S 900, S 1000 Front Forward Upper & Lower Control Arms
Fitment:
- 2017–2026 Polaris General 1000
- 2017–2026 Polaris General 4 1000
- 2021–2026 Polaris RZR Trail
- 2021–2026 Polaris RZR Trail S 900
- 2021–2026 Polaris RZR Trail S 1000
- 2018–2021 Polaris RZR S 900,
- 2018–2021 Polaris RZR S 1000
- 2018–2021 Polaris RZR S 4 900
- 2018–2021 Polaris RZR S 4 1000
- 2017 Polaris RZR 4 900
High Lifter control arms are precision-built for easy installation, maximum ground clearance, and added axle protection.
The lower arms are strategically arched to follow the axle angle without excessive bending that could increase the risk of damage. Each arm is manufactured to install like the factory part, with select models featuring a precision-cut High Lifter logo in the bracing.
The ball joints come preinstalled (BJP-3) using a hydraulic press to ensure proper pressure, alignment, and clip placement. This helps prevent installation damage that isn't covered by High Lifter's Lifetime Warranty. Step-by-step, photo-based instructions make installation straightforward, and stock bushings can be used if they're still in good condition.
High Lifter recommends checking your bearings, bushings, ball joints, and brakes before installation and replacing any worn parts.
Features:
- 25% larger than average stock arms - Crafted from 1 ¼" DOM steel
- Up to 2.5x the wall thickness of an average stock arms - .188" wall thickness
- Grease fittings included for most models
- Added ground clearance featuring bends that maximize clearance and axle protection
- Most stock powder coat colors available in stock
- Easy to install and maintain
- Limited Lifetime Warranty
Tire Fitment:
- Up to 31" without a lift or 33" with a lift kit.
- Fitment may vary based on tire brand, actual tire size, wheel offset, and other modifications.
- Always verify compatibility before purchase.
