If you're in the market to upgrade your suspension and beef up the front end of your car, then we've got you covered.
Geiser Performance 72" Can-Am X3 are constructed completely from 4130 Chromoly and double pass TIG-welded. Our arms will provide you with superior support and strength for all of your riding needs whether its racing, duning or just spirited driving with your friends and family.
Our arms eliminate the need for factory bushings and ball-joints and utilize 7/8" Spherical bearings and custom 303SS Misalignment Spacers, and 300M Misalignment Pins. These arms will fit both stock and ZRP Knuckle configurations.
YOU MUST RUN LIMIT STRAPS (SET UP CORRECTLY) TO ENSURE THE CAR DOES NOT HAVE ANY BIND IN THE SUSPENSION PIVOTS.
YOU MUST SHAVE DOWN THE STEERING STOP ON THE FACTORY KNUCKLE.
YOU MUST CYCLE THE SUSPENSION FULLY TO ENSURE THE CAR IS SET UP CORRECTLY.
Geiser Can-Am X3 Control Arms will not bolt right up with the XRC Front Bumpers or TMW/Assault Gusset Kits, due to the larger diameter tube cup for the spherical bearings. these parts will need to be modified or removed/replaced to allow proper fitment and cycling of our arms.
Arms are costed as a pair, and are priced raw.
