EVP Stage 1 ECU Power Flash for 2026 Can-Am Defender HD11
Transform your Can-Am Defender HD11 with more than 25 horsepower gained on the hit. EVP's Stage 1 ECU power flash and Clicker Clutch Weight kit (or Low Engagement Weight Kit) deliver a night-and-day difference in overall power delivery, responsiveness, and drivability.
In stock form, the HD11 posted a 16.85 0-60 time. After tuning the MG1 ECU and optimizing the PDrive primary clutch, this package now achieves a 13.53 0-60 timeover 3 seconds faster.
| ECU Flash Option | Wheel HP | Crank HP | Fuel (Octane) | Recommended Components |
|---|---|---|---|---|
| Stock | 61 | 95 (BRP Advertised) | 91 | N/A |
| EVP Stage 1-91 (Tune Only) | 65.36 | 102 | 91 | N/A |
| EVP Stage 1-91 + Low Engagement Clutch Kit | 80.76 | 126 | 91 | Low Engagement Clutch Weights |
| EVP Stage 1-91 + EVP High Engagement Clutch Kit | 83.2 | 129 | 91 | EVP Clicker Clutch Weights |
All dyno runs were performed in EVP's Wisconsin R&D center. Performance may vary based on atmospheric conditions and altitude. Horsepower gains are the result of a combination of EVP Stage 1 Tune and EVP Clicker Clutch Weights.
Features:
- Speed limits raised in high and low gear
- Torque limits removed in high and low gear
- High- and low-gear rev limits increased from 8500 to 8750 rpm
- V-Max raised from 68 to 93 mph
- Improved throttle response
- Engine fans on/off lowered for summer or stock for winter (both tunes available)
- No Brake Startno need to press the brake to start the engine
- Stage 1 is a 91 octane tune but will automatically reduce ignition for 87 octane with slight power reduction
Standard Tuning Features:
Raised rev and torque limits, remapped fueling and ignition timing, and numerous safety features ensure optimal performance in all conditions. Integrated engine cooling options allow customers to choose between stock parameters for colder climates or lower temperatures for warmer climates.
Fitment: 2026 Can-Am Defender HD11
Installation Notes:
The ECU is located behind the back right seat of the cab. The diagnostic port is located in the front under the hood. Customers are responsible for purchasing the shipping label and sending the ECU to EVP's Wisconsin facility. ECUs will be returned via UPS Ground Delivery (excluding international orders).
This tuning product is intended for off-road and competition use only unless otherwise stated. Installation and use may affect emissions compliance, vehicle performance, durability, and warranty coverage. Buyer is responsible for verifying fitment, intended use, and compliance with all applicable local, state, and federal laws before installation or operation.
Fits The Following Vehicles
- 2026 Defender HD11
