2016-2019 Defender HD10 Performance Tuning
| Stage | Octane | Crank HP | Operating RPM |
|---|---|---|---|
| Stock | 91 | 75 | 7200 |
| Stage 1 | 91 | 78 | 7200 |
| Stage 2 | 91 | 83 | 7200 |
2020+ Defender HD10 Performance Tuning
| Stage | Octane | Crank HP | Operating RPM |
|---|---|---|---|
| Stock | 91 | 82 | 6800 |
| Stage 1 | 91 | 85 | 6800 |
| Stage 2 | 91 | 88 | 6800 |
The Can-Am Defender is an awesome sport/utility/work vehicle. Through tuning and exhaust components, significant horsepower gains are achieved via timing, fueling, torque limit modifications, rev limits, and speed limits adjustments.
Safety is built into the tune by lowering the fan on temperature. The OEM fan on temperature is too high (well over 200°F). Fan on/off temperatures can be customized for each customer depending on location and riding conditions. Additional features enhance drivability and the fun factor of the vehicle.
Your ECU can be sent for reprogramming or completed by one of our authorized flashing dealers. Evolution Powersports makes it easy to upgrade your tune in the futureyou only pay for the difference in tune cost plus shipping. If you need the vehicle returned to stock for warranty purposes, we will flash it back to stock and reinstall the tune after dealer service for free. You only pay for shipping.
2016-2019 Performance Features:
- Rev limiter raised
- 100% throttle
- Improved throttle response in all modes (E-gas improved)
- Improved ignition timing advance optimized for 91 octane
- Fueling adjusted for aftermarket components (intakes, exhaust, race pipes) for optimal air-fuel ratios
- No need to "piggyback" fuel controller with our reflash for most bolt-on mods
- Engine speed torque limiters removed "Shaft Saver Delete"
- V-Max deletes (speed limiter removed)
2020+ Performance Features:
- Left-foot braking for 2-foot operation
- Speed limits raised in high and low gear
- Torque limits removed in high and low gear
- High- and low-gear rev limits increased from 8000 to 8500 RPM
- V-Max raised
- Improved throttle response
- Engine fans turn on at 192°F, turn off at 186°F
- Race-Start: No need to press the brake to start the engine
- Each stage runs 91 octane
Fitment: 2016+ Can-Am Defender HD10 (all models)
Tuning Disclaimer: This tuning product is intended for off-road and competition use only unless otherwise stated. Installation and use may affect emissions compliance, vehicle performance, durability, and warranty coverage. Buyer is responsible for verifying fitment, intended use, and compliance with all applicable local, state, and federal laws before installation or operation.
Fits The Following Vehicles
- 2027 Defender HD7-HD10
- 2026 Defender HD7-HD10
- 2025 Defender
- 2024 Defender
- 2023 Defender
- 2022 Defender
- 2021 Defender
- 2020 Defender
- 2019 Defender
- 2018 Defender
- 2017 Defender
- 2016 Defender