EVO 2013-2018 Can-am Maverick 1000R ECU Bench Power Flash
This ECU Bench Flash Service requires you to complete and include the ECU Submission Form with your physical ECU. ECUs will not be accepted without the completed form. (Call to be emailed the ECU Submission form) Print the form and ship it with your ECU to 2018 State Road 35, Somerset, WI 54025.
Typical flash turnaround time is 24–48 hours after your ECU is received, not including shipping time.
Please package your ECU carefully to prevent damage during transit. EVP is not responsible for damage that occurs before receiving your ECU.
Features:
- Rev Limiters set at 8700 RPMS
- Speed / TQ limits removed in Low Gear
- Now Low Gear revs to 8700
- Speed / TQ limits removed in High Gear
- Now High Gear revs to 8700
- Engine Speed TQ Limiters removed (“Shaft Saver delete”)
- V-Max Removed (Removed vehicle speed limiters)
- Improved throttle response in all modes (E-Gas Settings Improved)
- 100% throttle in all Modes
- Fans set to activate at 165 degrees
- Race Start - No need to press the brake to start vehicle
- Left Foot Brake Enabled - Allows the use of the brake and accelerator pedal at the same time
- See our “Videos” section for dyno graphs
- Please send your ECU to our Somerset, WI Location for programming
