Product Overview 🔧

The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.

Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.

The PTI version comes with a Bosch 3 bar MAP sensor pre-wired into the PC6 harness. Just install the sensor into the intake plenum and read PRESSURE within the PC6 software. The device comes with the PRESSURE table already configured for easy setup and usage.

All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device.

Features & Benefits ⚙️

• ✅ Compact design for discrete placement & easy uninstallation to revert to stock settings
• ✅ Easily change & upgrade tunes as you upgrade parts
• ✅ Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride's potential
• ✅ Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300
• ✅ Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
• ✅ Easily connects to your computer via USB
• ✅ Each cylinder can be mapped individually and for each gear, giving riders more granular control
• ✅ One year warranty
• ✅ Proudly made in the USA

PTI Version Details 🔥

The PTI version integrates a Bosch 3 bar MAP sensor pre-wired into the harness for precise pressure monitoring. Installation is simple: place the sensor into the intake plenum and monitor PRESSURE directly in the PC6 software. The PRESSURE table is pre-configured for seamless setup.

This upgrade enhances tuning accuracy, enabling superior performance on your Yamaha YXZ1000R series vehicles.

Exact Fitment List 📋

• Yamaha YXZ1000R
• Yamaha YXZ1000R SE
• Yamaha YXZ1000R SS
• Yamaha YXZ1000R SS SE
• Yamaha YXZ1000R SS XT-R

Note: Designed specifically for Yamaha YXZ1000R models and their variants to ensure perfect tuning compatibility.

What Our Customers Are Saying ⭐⭐⭐⭐⭐