DS18 Audio NXL 6.5" Marine & Powersports Red Tower Speaker w/ LED RGB Lights (100W Rms) (Pair)
The DS18 Audio NXL 6.5" Marine & Powersports Red Tower Speaker w/ LED RGB Lights (100W Rms) (Pair) brings high-output sound and vibrant visual styling to open-air audio builds. Designed for wakeboard towers, roll cages, and outdoor vehicle frames, these compact 6.5-inch tower pods project clear full-range audio engineered to cut through wind, water spray, and trail noise.
Built to handle harsh outdoor elements, the system features IP65 waterproof certification, 100% UV-stable protection, and salt-spray resistance. Housed in a heavy-duty injection PC+ABS composite enclosure with an eye-catching red finish, these speakers combine long-lasting marine-grade durability with bold custom aesthetics.
Sold as a complete pair, each pod integrates built-in RGB LED lighting across the speaker cone, acrylic accent ring, and rear logo, providing customizable visual illumination to complement nighttime rides, boat cruises, or off-road excursions.
Features
- Compact 2-Way Tower Design: 6.5-inch pod enclosure engineered for wakeboard towers and roll bars to deliver focused, high-volume audio.
- High-Efficiency Power Handling: Rated at 100W RMS and 300W MAX power handling per pair at a 4-ohm nominal impedance.
- Bold Red Finish: Features a high-visibility red composite housing paired with protective ASA injection-molded speaker grilles.
- Multi-Zone RGB LED Lighting: Features integrated RGB lighting illuminated across the speaker cone, acrylic accent ring, and backlit rear logo.
- Hybrid Magnet Motor Structure: Powered by a combination of Y35 ferrite and N40H reverse neodymium magnets for strong motor performance.
- 360-Degree Swivel Clamps: Includes die-cast adjustable clamps fitting 1-inch to 2-inch bars, supporting both buried and open wire routing.
Advanced Audio Componentry
Each tower speaker utilizes a 6.5-inch waterproof injection-molded polypropylene woofer cone with a butyl surround, driven by a 1.2-inch voice coil and high-temp PC composite basket. High frequencies are handled by a 1-inch titanium dome tweeter with a PEI surround and neodymium magnet, running through a 6dB/octave crossover to achieve 91dB sensitivity and a 65Hz to 23kHz frequency response (recommended high-pass crossover at 80Hz).
Integrated Multi-Zone RGB Lighting
Built-in 12V RGB LEDs light up multiple areas of the enclosure, including the front cone, acrylic accent ring, and rear logo. Utilizing a 6-core wiring setup for lighting and audio, the system integrates seamlessly with standard RGB LED controllers for full color customization and app-based lighting effects.
Flexible Clamping and Mounting
Each set includes heavy-duty die-cast 360-degree rotating clamps designed to fit towers and roll bars ranging from 1" to 2" in diameter. Rubber NBR pads, stainless steel hardware, hexagon wrenches, safety ropes, and screw fastening glue are provided. Both the front and rear logos are rotatable to maintain correct display orientation regardless of mounting angle.
Specifications
| DS18 Audio NXL 6.5" Marine & Powersports Red Tower Speaker w/ LED RGB Lights (100W Rms) (Pair) |
|
| General Specifications | Detail |
| Nominal Diameter | 6.5 inch |
| Nominal Impedance | 4 Ohm |
| RMS Power Handling | 100W |
| MAX Power Handling | 300W |
| Sensitivity (1w/1m) | 91 dB |
| Frequency Response | 65 Hz - 23 KHz |
| Recommended HI Pass Crossover | 80Hz |
| Body / Features | Detail |
| Enclosure Material | Injection PC+ABS |
| Marine Grade Type | IP65+UV Stable |
| RGB LED | Integrated LED-RGB Speaker Lighting, Integrated LED-RGB Acrylic Ring Lighting, and LED-RGB Back Logo with 6 Core Wires for Lighting and Speaker |
| Grill Type | ASA (Injection Grill) |
| Pair | Yes |
| Clamps | Die-Cast Adjustable (1"~2") 360 Degree Rotation Mounting Buried Wire or Open Wire Mounting Optional, Included NBR Pad And Stainless Hardware (Screws, Stop Washers, Hexagon wrench, Safety Rope, Screw fastening Glue) |
| Front Logo | Yes, can be rotated for correct angle display |
| Rear Logo | Yes, can be rotated for correct angle display |
| Woofer Specifications | Detail |
| Voice Coil Diameter (Woofer) | 1.2 inch |
| Cone Material | Waterproof Injection Polypropylene |
| Surround Material | Butyl |
| Basket Material | PC Injection Molded Composite |
| Magnet Material | Ferrite + Reverse Neodymium |
| Magnet Grade | Y35+N40H |
| Passive Radiator | No |
| Tweeter Specifications | Detail |
| Voice Coil Diameter (Tweeter) | 1 inch |
| Tweeter Type | Dome PEI Surround |
| Diaphragm Material | Titanium |
| Tweeter Magnet Material | Neodymium |
| Crossover | 6dB/Oct |
| Thiele & Small Parameters | Detail |
| Equivalent Volume Vas | 8.5 L |
| Excursion (one way) Xmax | 4 mm |
| Free Air Resonance Fs | 65 Hz |
| Total Factor Qts | 0.622 |
| Speaker Measurement | Detail |
| Overall Diameter | 6.93" / 176.1mm |
| Overall Depth | 11.37" / 288.8mm |
| Overall Height | 10.7" / 271.7mm |
Why It Stands Out
This tower speaker pair combines a compact 6.5-inch footprint with robust IP65 weatherproofing, high-output performance, and an attention-grabbing red finish. With multi-zone RGB lighting, rotatable logos, and 360-degree clamp mounts, it delivers an impressive combination of clear sound and visual style for wakeboard boats, personal watercraft, and powersports vehicles.
Application
- Fits 1" to 2" Bars
- Wakeboard towers and boat arch mounts
- ATVs, UTVs, and side-by-sides
- Golf carts and off-road vehicles
Includes
- (2) DS18 NXL 6.5" Marine Tower Speakers (Red, Pair)
- (2) Die-Cast Adjustable 360° Rotating Mounting Clamps (Fits 1"–2" Bars)
- Rubber NBR Mounting Pads & Stainless Steel Hardware (Screws, Stop Washers, Hexagon Wrench)
- Safety Ropes & Screw Fastening Glue
- Integrated 6-Core RGB LED & Speaker Wiring Harnesses
DS18 Audio (About)
DS18 is a leading electronics manufacturer that focuses on professional audio equipment for all vehicles. Our products are designed and engineered in the USA: and, we have access to multiple factories in Korea, Brazil, and China, with select items assembled here in the USA. We are headquartered in Miami, FL, and are one of the fastest-growing companies in the area. Our company creates more than 200 unique pieces of professional-grade audio equipment every year. These products are distributed both nationally and internationally, with international distribution channels reaching more than 89 countries. Our consistency and dedication to our craft have netted us revenue growth levels of 300 percent over the last 3 years. We specialize in the professional development of speakers, receivers, amplifiers, components, and a plethora of other products for car audio and home audio systems.
