Denali Polaris Xpedition Snow Plow
Fitment:
- Polaris Xpedition
The DENALI UTV Snow Plow is built to handle demanding winter conditions, including snow, ice, and sand.
Its heavy-duty blade features a 65° attack angle and over-center design that helps roll snow up and throw it forward efficiently. The centrally positioned mounting system transfers impact forces into the strongest part of the UTV/SxS frame, helping protect the front end from sudden impacts. With an easy-connect design, the plow can be installed quickly when winter arrives and removed in minutes when the season ends.
The durable mounting plate is custom-designed for your UTV frame and can remain installed year-round.
Features:
- 65° attack angle for efficient snow movement
- Over-center blade design helps roll and throw snow forward
- Heavy-duty construction built for snow, ice, and sand
- Central mounting position helps distribute impact forces
- Helps protect the UTV front end from sudden impacts
- Easy-connect design for quick installation and removal
- Quick seasonal removal when winter is over
- Custom-fit mounting plate designed for your UTV frame
- Mounting plate can remain installed year-round
- Requires a winch to raise and lower the plow blade
- Winch sold separately
- Compatible with VIPER V3 or VIPER Midnight winches
Kit Includes:
- UTV Snow Plow Blade - Straight
- Pushtubes
- Wearbar
- Skid Feet
- Installation Hardware and Instructions
Blade Features:
- Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11-gauge steel
- Four 7 gauge ribs run the full height of the blade
- Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
- 65° attack angle and over center design ensures snow rolls up and is thrown forward
- Replaceable 7 gauge steel wear bar included with every kit
- Height and angle adjustable skid feet included
Pushtube Features:
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows you to easily position your plow in 10 different angles - 0, 12.5°, 25°
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick Release Pins included
- 13.5 inches center to center for plow mount tabs
- Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Pushtube Lift Kits:
- Pushtube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
- Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)
Optional Hydroturn Features:
- Hydraulic system is sealed, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle with ease, stay on your machine while making adjustments
- Heavy duty chrome plated 3/4″ cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
PLEASE NOTE: Extended Pushtubes are NOT compatible with the Hydraulic Lift System
Optional Plow Pulley Fairlead Features:
- Roller:
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3″ x 6.67″
- Sheave:
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable:
- 12′ length and 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
