66" Plow System for CF Moto ZForce 800Zoom

66" Plow System for CF Moto ZForce 800

Item# DEN-2SBSS-77-10600
$829.99
Qty:

Description

NOTES:
- CANNOT SHIP TO ALASKA OR HAWAII.
- Must have a winch to use plow system.



Applicability: Fits
  • 2014-22 CFMOTO ZForce 800 and ZForce 800EX
  • 2016-22 CFMOTO ZForce 500
  • 2018-19 CFMOTO ZForce 1000

Are you in the market for 66-inches of cold hardened steel to do your dirty work? By dirty work, we're talking about the intense task of shoveling snow. No one wakes up and wants to break their back doing the ugly chore, which is why outfitting your CF Moto with a snowplow unit will change the face-of-the-game. Side By Side Stuff has several modules available, but the ZForce 500 66 Inch Pro Series Snow Plow System stands out amongst the lot. Here's why.

This UTV snowplow kit operates much like a highway plow. Only it isn't near as bulky. However, the county-style curved blade proves to push snow more efficiently. Especially when you factor in a turn system for angling and adjustable skid feet. You could nearly divert snow in any position while traveling the surface space. It's also designed to outlive most on the market. Denali sandblasts and powder-coats the steel with an epoxy. TGIC blend which offers corrosion and UV protection. Don't roll out of bed and dread clearing the snow. Instead, jump up and enjoy the ride as your machine does the work for you. All you need is this ZForce 800 snowplow system, and you'll be ready to go.


Blade Specifications:
  • U.S.A. made
  • County-style blade with curved design made of 12 gauge steel
  • Impact resistant reinforcement system disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
  • Includes edge stiffeners and stabilizer bar
  • Sand blasted, powder coated with epoxy primer and TGIC polyester top coat for corrosion protection, UV resistance and durability
  • Available in black, red or yellow
  • High strength, high yield 3/16 inch thick grade 50 steel wear bar
  • Angle blade is 23 inches on the tallest side and 16 inches on the shortest side
  • Rubber flap stabilizer bar with upgraded (stiffer) rubber flap
  • Plow markers included
  • Height and angle adjustable premium steel skid feet
  • Includes 3 year warranty on the plow blade against manufacturer defects

Push Tube Specifications:
  • Impact resistant reinforced pivot assembly
  • Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees, 12.5 degrees and 25 degrees
  • Simple detachment systems with the pull of a pin
  • Structural tube steel cross bar for added lateral rigidity

Plow Mount Specifications:
  • Front mount
  • 100% laser cut 1/4 inch steel
  • Slotted holes allow blade to hug the ground

Optional Hydroturn Specifications:
  • Parker hydraulics system with built in relief valve overload protection
  • Hydraulic system is completely sealed for life
  • Full radius turn in just 5 seconds while driving
  • Heavy duty chrome plated 3/4 inch cylinder shafts
  • Two bolt installation of hydraulic cylinder and pump
  • No modifications necessary
  • Wire harness utilizes weatherproof connectors
  • Backwards compatible with manual turning system
  • Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
  • Includes 3 year warranty


Optional Push Tube Length:
Choose the push tube length that you need to fit your needs. If you have tracks, then choose the extended push tube to get the snow plow further out, giving you more room for the tracks to work without interference.


Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.
  • Standard spool pattern: 3" x 4-7/8"
  • Wide spool pattern: 3" x 6.67"

Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.


Optional Pushtube Lift Kits:
When your UTV has those monster tires or that beastly lift kit on it, using a snow plow in the winter can be a pain. Finding a solution that solves the problem of your pushtube matching the height of your machine can mean complete removal of your tires or lift. With the Denali Pushtube Lift Kit installed, you can keep your tires and lift kit on, while giving Jack Frost the boot! This Pushtube Lift Kit bolts directly to your existing Denali UTV Pushtube giving an easy install, the 2 inch lift will give you 13-15 inches off the ground, and the 4 inch will give you 15-17, all while meeting your snow plow needs!







Scroll to top