Skip to main content
Shipping from 12 warehouses nationwide

International Shipping

  • Finland
  • France
  • Gabon
  • United Arab Emirates
  • United Kingdom
  • Puerto Rico
  • Peru
760 746 0600

(Mon - Fri 8:00 am - 5:00 pm PST)

CA Tech USA - Can-Am Maverick X3 / X3 MAX Heavy Duty 300M Ball Joints

(No reviews yet) Write a Review
$292.05
MSRP: $354.00
You save - $61.95 (17.50%)
item#:
CA-CA-043-CS

Important: Will not work on SuperATV or L&W control arms without special cap nuts.

The CA Tech Can-Am X3 Ball Joint 2.0 is engineered for extreme durability and performance. Tested in actual races and real-world conditions, these ball joints are designed to withstand the most rigorous trail riding and racing demands.

  • Larger stem for increased durability
  • Added lip to stem prevents ball joint boot from falling
  • Increased travel allows greater steering flexibility at steep tire angles
  • Enhanced rotation and articulation reduces binding
  • Full 300M steel construction
  • Unique adjustment and greasing features
  • State-of-the-art Nitride treating for wear resistance and anti-friction
  • Sold as a complete set of 4
  • Full Lifetime Warranty against workmanship defects and damage
  • Available in black only

Each ball joint consists of 7 precision-engineered parts:

  • Boot: Keeps contaminants out of the joint
  • Stem: Main component that transfers pressure to the knuckle
  • Body: Holds the stem in place
  • Wear Plate: Convex disc that transfers torque from the adjustment nut to the stem
  • Adjustment Nut: Threads into the body to maintain pressure and tightness as the unit wears
  • Locking Cap: Secures the ball joint assembly to the control arm
  • Adjustment Nut Jamb Bolt: Locks the adjustment nut in place once desired tension is set

A unique internal grease delivery system ensures complete lubrication of the stem. Grease is inserted through a flush-mount fitting in the adjustment nut jamb bolt and travels through drilled holes in all internal components. The stem features a cross-drilled hole that distributes grease around its exterior via a grease groove. A spiral groove design carries grease to the upper portion of the joint during pivoting, keeping the entire stem lubricated and protected from water and contaminants.

All components are designed and machined in-house from U.S.-made 4140 chromoly steel. After inspection, each component receives Liquid Nitride treating from a top-tier coating facility used by Glock, Sig Sauer, Barrett, NASCAR teams, and aerospace leaders. This treatment hardens the material, provides anti-friction properties, and offers case hardening protection.

Individual components are available for separate purchase to service the ball joints as needed.



Fits The Following Vehicles

  • 2027 Maverick X3
  • 2027 Maverick X3 MAX
  • 2026 Maverick X3
  • 2026 Maverick X3 MAX
  • 2025 Maverick X3
  • 2025 Maverick X3 MAX
  • 2024 Maverick X3
  • 2024 Maverick X3 MAX
  • 2023 Maverick X3
  • 2023 Maverick X3 MAX
  • 2022 Maverick X3
  • 2022 Maverick X3 MAX
  • 2021 Maverick X3
  • 2021 Maverick X3 MAX
  • 2020 Maverick X3
  • 2020 Maverick X3 MAX
  • 2019 Maverick X3
  • 2019 Maverick X3 MAX
  • 2018 Maverick X3
  • 2018 Maverick X3 MAX
  • 2017 Maverick X3
  • 2017 Maverick X3 MAX