AJK Offroad - Hi-Lift Off Road Mount/Clamp (1.50" ID)
Description
AJK Offroad Hi-Lift Mount/Clamp uses MALE DIAMOND KNURLS for a secure hold on the tube you are clamping.
A male diamond knurl helps hold the clamp in both directions from moving. We use two -20 SHCS to hold the two pieces together. This clamp can be mounted on any size tubing listed above. This is a clean way to mount your Hi-Lift on your roll cage, bumper or any other tubing.
You simply take each half of the clamp and bolt each side around the tubing where you want your Hi-Lift to be mounted and tighten the supplied bolts. Then set your Hi-Lift Jack on the two studs protruding from the clamps and use the supplied wing nut to secure your Hi-Lift to the clamp.
AJK machine these Hi-Lift Clamps/brackets in house from 6061-T6 billet aluminum. Every AJK Offroad part is proud to be designed and manufactured in the USA.
Features
- Uses MALE DIAMOND KNURLS
- Made from 6061-T6 Billet Aluminum
- Uses hardened Zinc plated stud with wing nut
- Clamps around tubing using two -20 SHCS
- SOLD INDIVIDUALLY
Additional Information
| Weight | 1.5 lbs |
| Dimensions | 4 x 3 x 1 in |
| Choose Size | 1.50, 1.75, 2.00 |
