Aftermarket Assassins Can Am Maverick X3/ R Fuel Pump Assembly
Features:
- Complete pump assembly is ready to drop in the tank
- High quality fuel pump is compatible with ethanol mixed fuels up to E-85High flow design will flow more than OEM but is regulated at the same 64-65psi pressure
- Great replacement if you think/know your factory pump is weak or if your current pump is not working
- Weak fuel pumps normally show a loss of power/peak RPM at wide open throttle.
- As they worsen, you may have low and mid range stumbling as well.
- Keep in mind sometimes bad fuel pumps send or allow debris to reach
- fuel injector inlet screen and the injectors may also need cleaning or replacing.
- Pump housing is assembled at the AA facility in the USA
- We highly suggest using a flashlight to look in the tank with the OEM pump removed.
- Make sure you do not have any debris in the tank that would cause new pump failure and clean out the tank if need be.
- Includes HD grounding wire harness.
- This harness is plug & play and allows us to use a higher amp pump and not cause any ECU faults.
- For proper installation procedure please refer to the service manual and reference our included instructions.
- Check out our Fuel Cap Removal Tool for easy removal and installation of the fuel tank retaining ring.
Fitment:
Direct OEM replacement for:
- Compatible with '18-'21 Can Am Maverick X3 172HP models,
- Compatible with 2020+ Can Am Maverick X3 RR (195 & 200hp) Models,
- Compatible with 2024+ Can Am Maverick R (240hp) Models
- Compatible with 2017 154hp Can Am Maverick X3 models,
- Compatible with 2018-22 120hp Can Am Maverick X3 models,
- Compatible with 2023+ 135hp Can Am Maverick X3 models with ECU tuning to match the higher fuel pressure of this pump
