Skip to main content
Shipping from 12 warehouses nationwide

International Shipping

  • Finland
  • France
  • Gabon
  • United Arab Emirates
  • United Kingdom
  • Puerto Rico
  • Peru
760 746 0600

(Mon - Fri 8:00 am - 5:00 pm PST)

Aftermarket Assassins Can Am Maverick R Full Exhaust with Center Exit & 3" Side Dump

(No reviews yet) Write a Review
$787.05
MSRP: $954.00
You save - $166.95 (17.50%)
item#:
AFT-110-1020-E

Product Information

BRAND: Aftermarket Assassins

Fits all 2024+ Can Am Maverick R 240HP, 2 & 4 Seat Models **2-3 Day Lead Time**

  • Exhaust uses your OEM tip for a stealthy look
  • **Note our original 3" side dump came out the side, our new style 3" exhaust side dump now exits the rear** Some pictures may be confusing, but it now exits out the rear of the vehicle and is a polished finished.
  • Much lighter than the bulky factory exhaust - 14.8lbs lighter!
  • Gains 2-3hp with the cutout closed, and up to 5-6hp with the 3" cutout open. Power increases will be greater depending on the tune you are running.
  • Works excellent on stock or tuned vehicles!
  • Exhaust features a 3" pipe off the turbo that enters our baffled muffler that has a 2.5" center exit, and a 3" side dump for maximum exhaust flow/sound
  • 3" side dump pipe has an electronic cutout and switch your 3" dump pipe open or closed on the fly via wired switch to your dash
  • With the 3" side dump closed, the 2.5" center exit has the same sound levels as stock with a nicer tone. This is great as it gets rid of the catalytic converter without being louder
  • With the 3" side dump open, you have awesome sound, amazing exhaust flow for even faster turbo spool, less heat, and more consistent power when running hard
  • High flow 3" mid pipe off the turbocharger which is larger than factory for less exhaust restriction resulting in quicker spool
  • Made with high quality V-Band clamps, laser cut brackets, and the highest quality exhaust bellow (flex joint)
  • No catalytic converter
  • The bottom heat shield near the turbocharger can be re-installed if you'd prefer
  • Made from Stainless Steel, then polished. Exhaust will bronze when hot.
  • Made in-house at our facility in the USA
  • See the sound clip HERE
  • Easily bolts in place; Installation normally takes under an hour
  • Cutout with Electronic Valve Part #: 110-1020-E