Product Information
BRAND:
RPM Powersports
WHATS INCLUDED
- Tuner with 205HP Pump gas 91-93 Octane Tune
- RPM Big Core Intercooler & Fan
- RPM Silicone Charge Tubes
- RPM BOV
- Upgraded H.P. Fuel Pump
- Intercooler Fan Override Switch & Harness
- Stage 2 Clutch Kit
CUSTOM TUNED POWERVISION MAVERICK X3 120HP BASE
If you are looking for the most badass custom tunes that are easily loaded to your X3 from the Dynojet Powervision, you've found them! AA's performance tunes are offered loaded directly on the Powervision ECU tuner. This versatile tuner allows our tunes to easily be uploaded to your factory ECU, switch between tunes, and even return to stock. The PV is also a great gauge showing boost, timing and much more. You can leave the Powervision hooked up for gauges, or completely remove it after flashing your ECU. The Powervision also has excellent data logging capabilities if you download the software, and use your laptop. You can even view trouble codes and erase them on the fly. We are highly experienced in ECU tuning and that will show. Our tunes are simply set up correctly, and everyone with a Powervision should have these tunes! They are also easily labeled and will show horsepower gains with supporting mods such as exhaust and clutching. These tunes modify all the necessary maps to create big horsepower, while still maintaining a reliable and safe X3. Each tune is built specifically for your Powervision allowing us to change various things like rev limit or fan temp if needed.
Big horsepower and torque gains depending on the level of tune desired, and supporting modifications.
Wicked throttle response and power delivery (for sport mode)
Throttle by wire limitations disabled
Torque calculations set correctly to ensure the most performance at all times
Fuel tables modified to gain low end punch and safe yet powerful air/fuel ratios
Get rid of the lean punch! The factory runs these things stupid lean when getting on boost and we fix that.
Boost tables properly modified for the fuel & modifications along with lightning quick turbo spool
Timing tables modified for best power per tune
Safety parameters to protect your motor and turbocharger are still in place
Speed limiters removed with the white key
2 foot limiters removed
Rev limit raised from 8300 to a safe 9000 RPM
Powervision flash tuner reprograms your ECU in roughly 8-10 minutes per flash over the diagnostic port
Easily return back to stock, switch tunes, or upgrade tunes at any time
A great gauge (see live boost and more) and data logging device
Our level 3 tune for a 120hp with intercooler and upgraded high pressure pump produces roughly 205 crank horsepower on 91 or 93 octane. This tune runs an average of 17-17.5psi of a boost. 2018-2019 models must have a high flow intake(2020+ models already have a high flow intake). **Must have aftermarket exhaust (at least cat delete). Wastegate crack pressure should be 7-8psi.**
