RPM 2020-2026 Can-Am X3 120HP to 190+HP Big Core Intercooler Upgrade Kit + Fan, Silicone, & BOV
If you're doing a upgrade to your 120hp X3 to take it to the next level then this is what you need! Intercooler kit, charge tube kit with BOV, OEM BRP Fuel Pump, and OEM intercooler fan assembly! If you need a cat delete / down pipe, check out our exhaust section for all our options!
RPM-SxS Can Am Maverick X3 Silicone Charge Tubes Kit + BOV
A must have upgrade for tuned or high powered machines. This replaces the factory oblong tubes with kinks in them with our durable silicone heat resistant, burst resistant hose. The smooth free flowing design reduces turbulence while increasing airflow efficiency. We have added a boost reference port for boost controller or any boost activated accessory along with a 25mm boost port. Stainless T-bolt clamps for the throttle body, intercooler, and turbo are included! Every charge tube kit comes with our billet/stainless boost reference port for your air box/plenum should you decide to add our Blow Off Valve kit!
RPM SxS Big Core Intercooler
Although the 2020+ intercoolers are larger than previous models, we were able to make a impressive improvement over stock! From mild to wild, this intercooler has you covered! A huge improvement over stock with its massive over sized core allows you to stay in peak power for longer and safer! Cooler IAT's and less heat soak equal more power even on 91 octane and less chance of knock or detonation. When tested in our deserty sand conditions we were able to maintain up to 40* cooler IAT's!
A great option for the 120hp guys upgrading to 195+ HP tunes that require the need for an intercooler!
This intercooler utilizes the factory fan & shroud assembly. If you're upgrading your 120hp non-intercooled model you will need to use the OEM (715900625) fan/shroud assembly from us THIS IS INCLUDED WITH THIS KIT. If upgrading your already intercooled unit, you will need the intercooler only (see our other listings).
- Gigantic 12"x11"x4" Bar & Plate Core
- Drop in replacement or upgrade, no modifications required.
- This intercooler does NOT utilize the factory top intercooler shroud.
- This intercooler is for 2020+ models only
- Fits ALL 2020+ X3 2 + 4 seat versions / models.
Depending on your route of tuning you may be able to utilize the factory Intercooler harness plug, otherwise we offer a manual fan switch giving you control.
Features
- Primary and Secondary Charge Tubes
- Washable BOV filter
- 30% More Volume
- Manifold Port for Vacuum/Boost Reference
- Silicone Reference port line ( 18" )
- Simple Bolt On Replacement
- Additional Vacuum Port For Boost Reference or Boost Gauge
- Stainless Steel HD Clamps
- 25mm Billet Plug For Not Running a BOV & Boost Leak Testing
Fitment
- 2020+ Can-Am X3
