XTC Kawasaki Ridge Self-Canceling Turn Signal System w/ Billet Lever
XTC Power Products has stepped up the game with our all new Billet Turn Lever for the ATS. You will never leave your turn signal on with our new Self-Canceling Turn Signal System for the 2024+ Kawasaki Ridge. Similar to its predecessor, the TSS (Turn Signal System), the ATS is a Plug and Play easy install Kawasaki Ridge turn signal kit that integrates seamlessly with the XTC Blinker Kit for enhanced turn signal performance. The ATS consists of a small solid-state control box that performs its functions"differing from the prior generations larger control box. Like the TSS, the ATS Self-Canceling Turn Signal Kit is a modular design with vehicle specific SKUs, making it compatible with an XTC Street Legal Kit for riders building a fully street-ready system.
How the ATS Works
The ATS with Billet Turn Lever part numbers includes a billet turn lever in lieu of the standard rocker switch. When you press the turn signal lever, the ATS will activate the turn blinker for a short duration and then self-cancel. This feature is useful for simple lane changes. On the other hand, an extended lever press will yield a longer blinker duration suitable for making left- and right-hand turns. You can manually cancel the turn signal by pushing the lever a second time, especially useful if paired with the XTC Blinker Kit for consistent signaling.
Also Included
Also included in our Self-Canceling Kawasaki Ridge turn signal kit is a "Hazard/Horn rocker switch. Pressing the top "Hazard side of the actuator will turn on the hazard lights, pressing it again deactivates them. Furthermore, pressing the lower portion of the custom rocker switch will activate the included street legal FIAMM horn, which complements the XTC Street Legal Kit for full compliance with road regulations. Each ATS has a vehicle-specific harness that plugs inline with the rear factory taillight harness. The brake light signal passes through the ATS. As a result, the opposing brake light still functions normally while the activated turn signal brake light flashes.
Hands-on with the ATS Kawasaki Ridge Turn Signal Kit with Billet Lever
Unlike our competitors, all ATS kits include an auxiliary power out for a license plate light or whip lights. Moreover the aux power is good for powering our 6"³ LED Lit License Plate Frame. Above all, this system plugs directly into the new Polaris Pulse Busbar power connection. Without a doubt, its easy to install with no wires to cut and no crimping. Because of its size, the ATS is versatile to mount as well. Everything needed to integrate with your vehicles OEM brake light harness included. Unplug the rear light harness, plug-in ours, and enjoy the added benefit of XTC Blinker Kit integration and optional XTC Street Legal Kit compliance. XTC Power Products, made in America and Wired For Fun!
