XTC Can-Am Commander Self-Canceling Turn Signal System (w/ Horn)
XTC Power Products leads the way in UTV wiring. You will never leave your turn signal on with our new Self-Canceling Turn Signal System for the Can-Am Commander. Similar to its predecessor, the TSS (Turn Signal System), the ATS is a Plug and Play easy install Can-Am Commander turn signal kit that integrates seamlessly with the XTC Blinker Kit for consistent and reliable signaling. The ATS consists of a small solid-state control box that performs its functions"differing from the prior generation's larger control box. Like the TSS, the ATS Self-Canceling Turn Signal Kit is a modular design with vehicle-specific SKUs, making it compatible with an XTC Street Legal Kit for riders looking to complete a fully street-ready setup.
How the ATS Works
All ATS part numbers include a marine grade rocker switch with laser-cut directional arrows that flash green when activated. When you press the turn signal rocker switch, the ATS will activate the turn blinker for a short duration and then self-cancel. This feature is useful for simple lane changes. An extended rocker switch press will yield a longer blinker duration suitable for making left- and right-hand turns. You can manually cancel the turn signal by pushing the actuator a second time, especially helpful when paired with the XTC Blinker Kit for full functionality.
Also Included
Also included in our Self-Canceling Can-Am Commander turn signal kit is a "Hazard/Horn' rocker switch. Pressing the top "Hazard' side of the actuator will turn on the hazard lights; pressing it again deactivates them. Pressing the lower portion of the custom rocker switch will activate the included street legal FIAMM horn, which complements the XTC Street Legal Kit for full compliance with road regulations. Each ATS has a vehicle-specific harness that plugs inline with the rear factory taillight harness. The brake light signal passes through the ATS, so the opposing brake light still functions normally while the activated turn signal brake light flashes.
Hands-on with the ATS Can-Am Commander Turn Signal Kit
Unlike our competitors, all ATS kits include an auxiliary power out for a license plate light or whip lights. The aux power is also ideal for powering our 6"³ LED Lit License Plate Frame. Above all, each system comes with a vehicle-specific power connection. Without a doubt, it's easy to install with no wires to cut and no crimping. Because of its size, the ATS is versatile to mount as well. Everything needed to integrate with your vehicle's OEM brake light harness is included. Unplug the rear light harness, plug in ours, and enjoy seamless integration with the XTC Blinker Kit and optional XTC Street Legal Kit for a complete, street-ready setup. XTC Power Products, made in America and Wired For Fun®!
