Rugged Radios Race Series Antenna Mount Kit
Purpose-built from the ground up for racing. Available in 7', 9', and 12' lengths.
Our Race Series Antenna Mount Kit features heavy-duty triple shielding, X1C low-loss race-spec cabling, and a one-piece nickel plated antenna mount are designed to deliver critical communications in the harshest environments.
Features
- Engineered with zero performance compromises
- X1C race spec cable
- Heavy-duty nickel plated NMO antenna mount
- Heavy-duty triple shielding
- High-Vis cable jacketing
- Standard PL-259 UHF connectors
- Maximum mounting surface thickness 7/16"
- Mounting hole diameter: 5/8"
Performance Properties
- Impedance: 50 ±2 Ω
- Capacitance: 84.5 pF/M
- Velocity of Propagation: 79% Nominal
- Attenuation (at 100 ft) Nominal:
- 25 MHz – 2.2 dB
- 26 MHz – 2.3 dB
- 27 MHz – 2.3 dB
- 28 MHz – 2.4 dB
- 29 MHz – 2.4 dB
- 30 MHz – 2.4 dB
- 50 MHz – 3.1 dB
- 150 MHz – 5.4 dB
- 220 MHz – 6.5 dB
- 450 MHz – 9.5 dB
- 900 MHz – 13.5 dB
- 1500 MHz – 17.7 dB
- 1800 MHz – 19.4 dB
- 2000 MHz – 20.5 dB
- 2500 MHz – 23.0 dB
- 3000 MHz – 25.1 dB
- 4500 MHz – 32.4 dB
- 5800 MHz – 36.3 dB
- 6000 MHz – 39.2 dB
- VSWR: < 1.25
- Dielectric Strength: 1.0KV / 1 minute minimum
Fitment / Compatibility
- Rugged Radios Mobile Radios
- Kenwood Mobile Radios
- Icom Mobile Radios
- Most mobile radios with standard PL-259 connector.
NOTE: The center conductor inside the NMO antenna stud is not solid metal and can be damaged if overtightened. As shown in the photo above, when installing the NMO nut, we recommend holding the wrench vertically to reduce torque and overtightening.
