For some strange reason Polaris decided to epoxy the fuel injectors to the harness on many Polaris 800 EFI models. This makes servicing or replacing the injectors a pain. If you purchased new aftermarket injectors you will need this harness!! This harness goes from the injector to the main wire harness. Forget about the epoxy mess forever! Overall length is 24"; and will only fit the MAG side.
NOTE: THE FUEL INJECTORS ARE NOT INCLUDED! THIS IS THE HARNESS ONLY! Fits injectors using Polaris part number 1204318.
| WEIGHT | 8 oz |
|---|---|
| DIMENSIONS | 6 × 10 × 1 in |