Kemimoto Spiral Whip Light Set (3-5FT)
Illuminate your off-road adventures with the Kemimoto Spiral Whip Light Set. This all-in-one kit includes two vibrant spiral whip lights, a durable whip light flag mount, and a 12V switch for seamless control. Designed to enhance visibility and style, these lights feature a unique spiral pattern and a wide range of colors to make your UTV or ATV stand out on the trail. Built to withstand rugged conditions, this set is easy to install and provides a brilliant, eye-catching glow for increased safety and fun.
Features
2 PCS Spiral Whip Lights
-
360° Spiral Glow
Kemimoto UTV LED whip light features spiral LED chips that glow in all directions, lighting up the sky to make vehicles highly visible on dunes, tracks, and trails. -
Durable Waterproof Design
Built with waterproof 5050 SMD chips, the lighted whip withstands all weather conditions. Backed by lifetime service, it ensures long-term performance with peace of mind. -
Quick Installation
Equipped with a quick-release base, the whip light installs or removes easily. A dust cap (except 3ft) helps prevent mud or sand buildup, while an included American flag with adjustable clamps waves freely without tangling.
Whip Light Flag Mount for 1.75"-2" Roll Bar
-
Durable Aluminum Build
Crafted from CNC-cut aluminum, these mounts feature an upgraded design with extra pins for a sturdier hold. This minimizes wear between the bracket and roll bar, ensuring long-lasting performance. -
Easy Installation
Designed with a simple bolt-on setup, the mounts require no drilling or trimming. The whip light angle can be quickly adjusted by loosening a single bolt for the perfect fit.
5 Pin 12V LED Lighted Whip Rocker Switch On-Off
-
Easy Installation
Kemimoto 5-pin on-off toggle rocker switch installs effortlessly without cutting or modifications. The factory plug-in design makes it a direct replacement for most setups. Just ensure the power cable is properly connected for correct polarity. -
Durable and Reliable
Constructed from advanced plastic with etched markings that will not fade, this heavy-duty rocker switch is rated at 20A/12V and 10A/24V. Certified with CE safety standards, it offers lasting durability and safe performance. -
Flexible Wiring Options
The toggle rocker switch supports multiple wiring methods. You can set the bottom light to stay on constantly, glow only when activated, or remain off until the switch is flipped. Fits into a standard square cutout for ATV, UTV, and more.
Specifications
2 PCS Spiral Whip Lights
- Luminous angle: 360° spiral luminescence
- Control by: RF Remote control
- Materials: EVA transparent heat-shrinkable tube and 6063 aviation aluminum Quick release Snap-On Base
- Waterproof Grade: IP67
- Lighting modes: 366
- Number of LEDs Per Whip Light: 3FT-150 pcs / 4FT-210 pcs / 5FT-300 pcs
- LED Chips Model: 5050 SMD
- LED life span: Over 50,000 hours of durability testing
- Speed adjustment: 6
- Brightness adjustment: 9
- Operating temperature: -30°C~50°C
- Remote control distance: 10m
- Cable length: Lamp cable length 20cm, control box input cable length 60cm, output cable length 2m
- Voltages: DC 12V
5 Pin 12V LED Lighted Whip Rocker Switch On-Off
- 20 Amp 12 Volt ON-OFF Rocker Switch
- LASER ETCHED WITH TWO LED LIGHTS
- Single Pole Single Throw ON-OFF Switch
- Black hard surface rocker
- Surface size: 2" (50mm) x 1" (25mm)
- Standard size mounting hole 1.41" (36mm) x .86" (22mm).
- Upper light is ON when the switch is pressed UP
- Lower LED is independent and can be wired to separate dash light circuit.
- Both LEDs have separate grounds.
- No rear barriers between terminals.
- Lower light, Waterproof rating of IP66.
- Color: White Light
Fitment
- Fits UTVs (Side-by-side) / Golf Carts & all DC 12V Universal Vehicles
- Can-Am Maverick / Defender / Commander
- Polaris RZR / Ranger / General / ACE
- Arctic Cat Wildcat
- Kawasaki Teryx KRX 1000
- Textron/Arctic Cat Wildcat XX
- Tracker XTR1000
- Yamaha YXZ / Rhino
- CFMOTO ZForce 800
Notes
- The whip lights are not bendable.
